Bambu-Run
Richer data, powerful customization for your Bambu Lab 3D printer.
Bambu-Run is a self-hosted web dashboard that gives you:
- Real-time monitoring and logging (temperatures, fan speeds, print progress, and more)
- Automatic filament inventory tracking and usage monitoring (AMS required)
All running on hardware you own.
What You'll Need
Any always-on device works — a Raspberry Pi (3B+, 4, or 5) is ideal: beginner-friendly, runs Raspberry Pi OS out of the box, and quiet enough to tuck behind a desk. An old PC or laptop with Linux works too.
It runs quietly in the background 24/7, capturing every print, filament change, and AMS update the moment it happens. And the power bill? A Raspberry Pi 4 under light load draws about 5W. That's roughly 43.8 kWh per year, or the cost of three cups of coffee. ☕☕☕ Tuck it out of sight and forget it's there.
Table of Contents
- Quick Start: One-Click Docker Setup — Beginner Friendly
- Batch Importing Filament Colors and Filament Types
Quick Start: One-Click Docker Setup — Beginner Friendly
Get Bambu-Run running on a Raspberry Pi in minutes. No prior server experience needed.
What You'll Need
- A Raspberry Pi (3B+, 4, or 5) running Raspberry Pi OS 64-bit, with a 32 GB+ MicroSD card, connected to your network
- Your Bambu Lab printer on the same local network
- Your Bambu Lab account email and password
- A computer to SSH into the Pi
Step 1: Connect to Your Raspberry Pi
From your computer, open a terminal (Mac/Linux) or PowerShell (Windows):
ssh pi@raspberrypi.local
Can't connect? Use your Pi's IP address (find it in your router's admin page). Default password:
raspberry
Step 2: Install Docker
curl -fsSL https://get.docker.com | sudo sh
sudo usermod -aG docker $USER
Log out and back in for the change to take effect, then verify:
exit
ssh pi@raspberrypi.local
docker --version # should show Docker version 27.x.x
Installation issues? See: https://docs.docker.com/engine/install/raspberry-pi-os/
Step 3: Download and Configure
git clone https://github.com/RunLit/Bambu-Run.git
cd Bambu-Run
cp .env.example .env
nano .env
Fill in your Bambu Lab credentials:
BAMBU_USERNAME=your_email@example.com
BAMBU_PASSWORD=your_password
TIMEZONE=Australia/Melbourne # optional — find yours at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
Save: Ctrl + X, Y, Enter
Step 4: Build the Container
docker compose build
This takes a few minutes the first time — it downloads all required software.
Step 5: First-Time Authentication
Bambu Lab requires email verification on first login. Run these two commands:
docker compose run --rm bambu-run python standalone/manage.py migrate --noinput
docker compose run --rm bambu-run python standalone/manage.py bambu_collector --once
When prompted, enter the 6-digit code sent to your email. On success you'll see a token printed — copy it and add it to your .env:
nano .env
BAMBU_TOKEN=eyJhbGciOiJIUzI1N...paste_full_token_here
Saving the token lets future restarts skip re-verification automatically.
Step 6: Start Bambu-Run and Create Your Login
docker compose up -d
docker compose exec bambu-run python standalone/manage.py createsuperuser
Choose a username and password — this is your dashboard login.
Step 7: Open the Dashboard
On any device on your network, open a browser and go to:
http://raspberrypi.local:8000
If that doesn't work, use your Pi's IP:
http://<pi-ip-address>:8000
Log in with the account you just created. Your printer dashboard should be live.
Troubleshooting
No data / cannot connect to printer: Make sure the printer is on and on the same network. Check logs: docker compose logs -f. If you see auth errors, re-run Step 5 to get a fresh token.
401 Unauthorized / verification loop: Remove BAMBU_TOKEN from .env and re-run Step 5.
Docker daemon error: Log out and back in after Step 2 — the group change requires a new session.
Dashboard not loading: Run docker compose ps to confirm the service is Up, then try the Pi's IP address directly.
Update Bambu-Run:
cd ~/Bambu-Run && git pull && docker compose up -d --build
Stop Bambu-Run:
docker compose down
Your data is preserved in a Docker volume and will be there when you start it again.
Batch Importing Filament Colors and Filament Types
Bambu-Run ships with a full Bambu Lab color catalog under docs/Bambu_Color_Catalog/ (one .txt file per filament sub-type, e.g. PLA Basic.txt, PETG HF.txt). Importing these populates the Filament Colors database so the dashboard shows proper color names instead of raw hex codes.
Adding your own colors
Need a filament type that isn't in the bundled catalog? Create your own .txt file and point the importer at it.
File naming — the filename determines the filament type and sub-type:
PLA Basic.txt → type: PLA, sub-type: PLA Basic
PETG HF.txt → type: PETG, sub-type: PETG HF
ABS.txt → type: ABS, sub-type: ABS
File format — list each color on its own line, either as two rows (name then hex) or on the same line:
Jade White
Hex:#FFFFFF
Black Walnut #4F3F24
Bambu Lab's website filament pages and their downloadable PDF catalogs are a reliable source — both list color names alongside hex codes you can copy directly.
When to run this
Run the import once after first setup to seed the full color catalog in one go, rather than adding colors one by one. Run it again any time you want to add colors for a new filament type. Re-running is always safe — duplicates are detected and skipped automatically.
Import all colors (recommended)
If the container is already running (docker compose up -d):
docker compose exec bambu-run python standalone/manage.py bambu_import_colors docs/Bambu_Color_Catalog/
If the container is not running yet:
docker compose run --rm bambu-run python standalone/manage.py bambu_import_colors docs/Bambu_Color_Catalog/
Import a file from your computer
If your .txt color file lives on your Mac, Pi, or any machine running Docker (i.e. not inside the repo), copy it into the container first, then run the importer:
# Step 1 — copy the file from your machine into the container
docker compose cp /path/to/your/PLA\ Basic.txt bambu-run:/tmp/
# Step 2 — run the importer against the copied path
docker compose exec bambu-run python standalone/manage.py bambu_import_colors /tmp/PLA\ Basic.txt
To import a whole folder of files at once:
# Step 1 — copy the folder
docker compose cp /path/to/your/color_catalog/ bambu-run:/tmp/color_catalog/
# Step 2 — import everything in it
docker compose exec bambu-run python standalone/manage.py bambu_import_colors /tmp/color_catalog/
macOS tip: You can drag a file from Finder into the terminal to paste its full path.
Import a single filament type
To import only one sub-type from the bundled catalog (e.g. just PLA Basic):
docker compose exec bambu-run python standalone/manage.py bambu_import_colors "docs/Bambu_Color_Catalog/PLA Basic.txt"
Preview before importing (dry run)
Check what would be added without writing anything to the database:
docker compose exec bambu-run python standalone/manage.py bambu_import_colors docs/Bambu_Color_Catalog/ --dry-run
What the output means
Processing: PLA Basic.txt → type='PLA' sub_type='PLA Basic'
Parsed 40 color(s).
+ 'Bambu Green' #009F87 (PLA / PLA Basic)
+ 'Jade White' #FFFFFF (PLA / PLA Basic)
...
──────────────────────────────────────────────────
Created: 40
Skipped (duplicate): 0
- Created — new color entries added to the database
- Skipped (duplicate) — already existed, not changed
- Skipped (no type) — only shown if
--no-auto-create-filament-typeis used and the filament type isn't in the database yet