Native setup and Downsample data (#4)

* PrinterDataAPIView downsample

* filament usage chart now works without day constraint

* One command native setup

* add setup timezone verification and link

* added wipe off instructions

* setup default to port 80

* user selectable port number with default to 80

* skip superuser creation if exists

* auto install iptables if not available

* wipe out instructions updated

README.md

@@ -1,239 +1,264 @@
 # Bambu-Run
 
-Unlock richer data access and powerful customization capabilities for your Bambu Lab 3D printer.
+<p align="center">
+  <img src="docs/BambuRun.png" alt="Bambu-Run Logo" width="300"/>
+</p>
 
-Bambu-Run is a self-hosted web dashboard that tracks data of your Bambu Lab printer. It gives you:
+Richer data, powerful customization for your Bambu Lab 3D printer.
-- Real-time monitoring and logging (temperatures, fan speeds, print progress etc) 
-- Automatic filament inventory tracking and usage monitoring system (AMS required)
-all running on hardware you own.
 
-### Hardware Requirement
+Bambu-Run is a self-hosted web dashboard that gives you:
+- Real-time monitoring and logging (temperatures, fan speeds, print progress, and more)
+- Automatic filament inventory tracking and usage monitoring (AMS required)
 
-Recommend a raspberry pi, installed with Raspberry Pi OS (low cost running at the background) or an old PC/Laptop you probably never going to use again (install Linux).
+All running on hardware you own.
-
-## Getting Started (Beginner Friendly)
-
-This guide walks you through setting up Bambu-Run on a **Raspberry Pi** from scratch. No prior server experience needed.
 
 ### What You'll Need
 
-- A Raspberry Pi (3B+, 4, or 5) with Raspberry Pi OS installed and connected to your network
+Any always-on device works — a **Raspberry Pi** (3B+, 4, or 5) is ideal: beginner-friendly, runs Raspberry Pi OS out of the box, and quiet enough to tuck behind a desk. An old PC or laptop with Linux works too.
-- Your Bambu Lab printer on the **same local network** as the Pi
-- Your printer's **IP address**, **access token**, and **serial number** (we'll show you how to find these below)
-- A computer on the same network to SSH into the Pi
 
-### Step 1: Find Your Bambu Lab Account Credentials
+It runs quietly in the background 24/7, capturing every print, filament change, and AMS update the moment it happens. And the power bill? A Raspberry Pi 4 under light load draws about **5W**. That's roughly **43.8 kWh per year**, or the cost of **three cups of coffee**. ☕☕☕ Tuck it out of sight and forget it's there.
 
-Bambu-Run connects to your printer through the **Bambu Lab Cloud** using your account login — the same email and password you use for Bambu Handy or Bambu Studio.
+---
 
-You'll need:
+## Table of Contents
-- **BAMBU_USERNAME** — Your Bambu Lab account email
-- **BAMBU_PASSWORD** — Your Bambu Lab account password
 
-> **First-time login requires email verification.** Bambu Lab will send a 6-digit code to your email. You'll enter this code during Step 5a below. After that, you'll receive a token that skips verification on future startups.
+- [Native Setup (Recommended for Raspberry Pi)](#native-setup-recommended-for-raspberry-pi)
+  - [What You'll Need](#what-youll-need)
+  - [Clone and run setup.sh](#clone-and-run-setupsh)
+  - [Managing Bambu-Run](#managing-bambu-run)
+  - [Troubleshooting (Native)](#troubleshooting-native)
+- [Docker Setup](#docker-setup)
+- [Batch Importing Filament Colors and Filament Types](#batch-importing-filament-colors-and-filament-types)
 
-### Step 2: Connect to Your Raspberry Pi
+---
 
-From your computer, open a terminal (Mac/Linux) or PowerShell (Windows) and SSH into the Pi:
+## Native Setup (Recommended for Raspberry Pi)
+
+No Docker required. Works on any Raspberry Pi (including 32-bit Pi Model B) running Raspberry Pi OS with Python 3.10+.
+
+### What You'll Need
+
+- Raspberry Pi on your local network (Python 3.10+)
+- Bambu Lab printer
+- Bambu Lab account **email and password**
+
+### Clone and run setup.sh
 
 ```bash
-ssh pi@raspberrypi.local
-```
-
-> If `raspberrypi.local` doesn't work, use your Pi's IP address instead (check your router's admin page to find it).
-
-The default password is `raspberry` (you should change it after first login with `passwd`).
-
-### Step 3: Install Docker
-
-Docker lets you run Bambu-Run in a container — no need to install Python, databases, or anything else manually.
-
-Run these commands one at a time:
-
-```bash
-# Download and run Docker's install script
-curl -fsSL https://get.docker.com | sudo sh
-
-# Let your user run Docker without sudo
-sudo usermod -aG docker $USER
-```
-Installation issue? check installation methods for raspberry pi: https://docs.docker.com/engine/install/raspberry-pi-os/#installation-methods
-
-**Important:** Log out and log back in for the group change to take effect:
-
-```bash
-exit
-```
-
-Then SSH back in:
-
-```bash
-ssh pi@raspberrypi.local
-```
-
-Verify Docker is working:
-
-```bash
-docker --version
-```
-
-You should see something like `Docker version 27.x.x` — the exact number doesn't matter.
-
-### Step 4: Download and Configure Bambu-Run
-
-```bash
-# Clone the project
 git clone https://github.com/RunLit/Bambu-Run.git
 cd Bambu-Run
-
+bash setup.sh
-# Create your configuration file
-cp .env.example .env
 ```
 
-Now edit the `.env` file with your printer details:
+That's it! The script handles everything interactively, just answer the prompts. When it finishes, open `http://<ip>` from any device on same network.
+
+The script is safe to re-run at any time.
+
+---
+
+**What the script does**:
+
+- **Dependencies**: creates a Python virtual environment, installs all packages
+- **Credentials**: prompts for your **BambuLab Cloud account** email, password, and timezone; auto-generates a `DJANGO_SECRET_KEY`; writes `.env`
+- **Bambu Cloud auth**: runs `bambu_collector --once`; 
+  - Bambu Lab will send a 6-digit code to your email; check you email box and enter it when prompted; 
+  - the resulting token is saved to `.env` automatically; future restarts skip this step
+- **Dashboard login**: runs `createsuperuser`; choose a username and password for Bambu-Run web UI log in
+- **Services**: installs and starts two systemd services (`bambu-run-web` and `bambu-run-collector`), enables linger so they auto-start on boot
+- **Port 80**: sets an `iptables` redirect (80 to 8000) so you can reach the dashboard at a plain `http://<pi-ip>` with no port number; persisted via `iptables-persistent` across reboots. 
+
+---
+
+### Managing Bambu-Run
+
+All commands manage Bambu-Run encapsulated in `./native/bambu-run.sh`. Alternatively, you can do it yourself with systemctl commands.
+```bash
+./native/bambu-run.sh status    # service status
+./native/bambu-run.sh logs      # tail live logs (Ctrl+C to stop)
+./native/bambu-run.sh restart   # restart both services
+./native/bambu-run.sh stop      # stop everything
+./native/bambu-run.sh update    # git pull + pip install + migrate + restart
+```
+
+### Troubleshooting (Native)
+
+**Services die when SSH disconnects:** `sudo loginctl enable-linger $USER`
+
+**Services not starting:** `./native/bambu-run.sh status` and `./native/bambu-run.sh logs`
+
+**Auth errors / token expired:** Remove `BAMBU_TOKEN` from `.env` and re-run `bash setup.sh`
+
+**Uninstall:**
+```bash
+systemctl --user disable --now bambu-run-web bambu-run-collector
+rm ~/.config/systemd/user/bambu-run-{web,collector}.service
+systemctl --user daemon-reload
+```
+
+**Wipe everything and start over:**
+```bash
+# Stop and remove services
+systemctl --user stop bambu-run-web bambu-run-collector
+systemctl --user disable bambu-run-web bambu-run-collector
+rm ~/.config/systemd/user/bambu-run-{web,collector}.service
+systemctl --user daemon-reload
+
+# Remove port redirect (replace 80 with whatever port you chose during setup)
+sudo iptables -t nat -D PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8000 2>/dev/null || true
+sudo iptables -t nat -D OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8000 2>/dev/null || true
+sudo netfilter-persistent save 2>/dev/null || true
+
+# Delete repo — wipes venv, database, and .env
+cd ~
+rm -rf ~/Bambu-Run
+
+# Re-clone and run setup from scratch
+git clone https://github.com/RunLit/Bambu-Run.git
+cd Bambu-Run
+bash setup.sh
+```
+
+---
+
+## Docker Setup
+
+Requires Docker and Docker Compose installed. Assumes you already know how to get there.
+
+**Clone and configure:**
 
 ```bash
-nano .env
+git clone https://github.com/RunLit/Bambu-Run.git
+cd Bambu-Run
+cp .env.example .env
+# Edit .env: set BAMBU_USERNAME, BAMBU_PASSWORD, TIMEZONE
 ```
 
-Fill in your Bambu Lab account credentials from Step 1:
+**First-time auth** (Bambu Lab sends a 6-digit verification code to your email):
-
-```
-BAMBU_USERNAME=your_email@example.com
-BAMBU_PASSWORD=your_password
-```
-
-Optionally set your timezone (defaults to UTC):
-
-```
-TIMEZONE=Australia/Melbourne
-```
-
-> You can find your timezone name at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-
-To save and exit nano: press `Ctrl + X`, then `Y`, then `Enter`.
-
-### Step 5: Build and Start Bambu-Run
-
-First, build the container:
 
 ```bash
 docker compose build
-```
-
-This downloads all required software (takes a few minutes the first time).
-
-### Step 5a: First-Time Authentication
-
-The first time you connect, Bambu Lab requires email verification. You need to run the collector **interactively** (not in the background) so you can enter the 6-digit code.
-
-First, set up the database:
-
-```bash
 docker compose run --rm bambu-run python standalone/manage.py migrate --noinput
-```
-
-Then run the collector (this is what triggers Bambu Lab to send the verification email):
-
-```bash
 docker compose run --rm bambu-run python standalone/manage.py bambu_collector --once
+# Paste the printed token into .env as BAMBU_TOKEN=...
 ```
 
-You'll see output like:
+**Start and create your dashboard login:**
-
-```
-BambuLab Authentication
-Authenticating as: your_email@example.com
-...
-EMAIL VERIFICATION REQUIRED
-A verification code has been sent to your email.
-Enter verification code:
-```
-
-1. Check your email for the 6-digit code from Bambu Lab
-2. Type the code and press Enter
-3. On success, you'll see a token printed:
-   ```
-   Authentication successful!
-   Token: eyJhbGciOiJIUzI1N...
-   TIP: Save this token to BAMBU_TOKEN env var to skip login next time
-   ```
-
-4. **Copy the full token** and paste it into your `.env` file:
-   ```bash
-   nano .env
-   ```
-   Add/uncomment the `BAMBU_TOKEN` line:
-   ```
-   BAMBU_TOKEN=eyJhbGciOiJIUzI1N...paste_full_token_here
-   ```
-
-> **Why save the token?** With the token saved, future container restarts authenticate instantly without needing email verification again. Without it, you'd need to repeat this step every time the container restarts.
-
-### Step 5b: Start Bambu-Run
-
-Now start everything in the background:
 
 ```bash
 docker compose up -d
-```
-
-Check that it's running:
-
-```bash
-docker compose ps
-```
-
-You should see the `bambu-run` service with status `Up`.
-
-### Step 6: Create Your Login Account
-
-```bash
 docker compose exec bambu-run python standalone/manage.py createsuperuser
 ```
 
-You'll be prompted to choose a username, email (optional), and password. This is your login for the dashboard.
+Dashboard is at `http://<host-ip>:8000`.
 
-### Step 7: Open the Dashboard
+**Common operations:**
 
-On any device connected to your network (phone, tablet, computer), open a browser and go to:
-
-```
-http://raspberrypi.local:8000
-```
-
-> If that doesn't work, use your Pi's IP address: `http://<pi-ip-address>:8000`
-
-Log in with the account you just created. You should see your printer dashboard with live data flowing in.
-
-### Troubleshooting
-
-**"Cannot connect to printer" or no data showing:**
-- Make sure your printer is turned on and connected to the network
-- Check the logs: `docker compose logs -f`
-- If you see authentication errors, your token may have expired — re-run Step 5a to get a fresh token
-
-**"Verification code" or "401 Unauthorized" errors:**
-- Your `BAMBU_TOKEN` may have expired. Remove it from `.env` and re-run Step 5a
-- Make sure `BAMBU_USERNAME` and `BAMBU_PASSWORD` are correct in your `.env` file
-
-**"Cannot connect to Docker daemon":**
-- Did you log out and back in after Step 3? Docker group changes require a new session
-
-**Dashboard not loading in browser:**
-- Verify the container is running: `docker compose ps`
-- Try using the Pi's IP address instead of `raspberrypi.local`
-
-**Updating to a newer version:**
 ```bash
-cd ~/Bambu-Run
+docker compose logs -f                          # live logs
-git pull
+docker compose down                             # stop (data preserved in volume)
-docker compose up -d --build
+git pull && docker compose up -d --build        # update
 ```
 
-**Stopping Bambu-Run:**
+**Troubleshooting:** Auth errors → remove `BAMBU_TOKEN` from `.env` and re-run the auth step. No data → check `docker compose logs -f` for MQTT connection errors.
+
+---
+
+## Batch Importing Filament Colors and Filament Types
+
+Bambu-Run ships with a full Bambu Lab color catalog under `docs/Bambu_Color_Catalog/` (one `.txt` file per filament sub-type, e.g. `PLA Basic.txt`, `PETG HF.txt`). Importing these populates the **Filament Colors** database so the dashboard shows proper color names instead of raw hex codes.
+
+### Adding your own colors
+
+Need a filament type that isn't in the bundled catalog? Create your own `.txt` file and point the importer at it.
+
+**File naming** — the filename determines the filament type and sub-type:
+```
+PLA Basic.txt     → type: PLA,  sub-type: PLA Basic
+PETG HF.txt       → type: PETG, sub-type: PETG HF
+ABS.txt           → type: ABS,  sub-type: ABS
+```
+
+**File format** — list each color on its own line, either as two rows (name then hex) or on the same line:
+```
+Jade White
+Hex:#FFFFFF
+
+Black Walnut    #4F3F24
+```
+
+Bambu Lab's website filament pages and their downloadable PDF catalogs are a reliable source — both list color names alongside hex codes you can copy directly.
+
+### When to run this
+
+Run the import **once after first setup** to seed the full color catalog in one go, rather than adding colors one by one. Run it again any time you want to add colors for a new filament type. Re-running is always safe — duplicates are detected and skipped automatically.
+
+### Import all colors (recommended)
+
+If the container is already running (`docker compose up -d`):
+
 ```bash
-docker compose down
+docker compose exec bambu-run python standalone/manage.py bambu_import_colors docs/Bambu_Color_Catalog/
 ```
 
-Your data is preserved in a Docker volume and will be there when you start it again.
+If the container is not running yet:
+
+```bash
+docker compose run --rm bambu-run python standalone/manage.py bambu_import_colors docs/Bambu_Color_Catalog/
+```
+
+### Import a file from your computer
+
+If your `.txt` color file lives on your Mac, Pi, or any machine running Docker (i.e. not inside the repo), copy it into the container first, then run the importer:
+
+```bash
+# Step 1 — copy the file from your machine into the container
+docker compose cp /path/to/your/PLA\ Basic.txt bambu-run:/tmp/
+
+# Step 2 — run the importer against the copied path
+docker compose exec bambu-run python standalone/manage.py bambu_import_colors /tmp/PLA\ Basic.txt
+```
+
+To import a whole folder of files at once:
+
+```bash
+# Step 1 — copy the folder
+docker compose cp /path/to/your/color_catalog/ bambu-run:/tmp/color_catalog/
+
+# Step 2 — import everything in it
+docker compose exec bambu-run python standalone/manage.py bambu_import_colors /tmp/color_catalog/
+```
+
+> **macOS tip:** You can drag a file from Finder into the terminal to paste its full path.
+
+### Import a single filament type
+
+To import only one sub-type from the bundled catalog (e.g. just PLA Basic):
+
+```bash
+docker compose exec bambu-run python standalone/manage.py bambu_import_colors "docs/Bambu_Color_Catalog/PLA Basic.txt"
+```
+
+### Preview before importing (dry run)
+
+Check what would be added without writing anything to the database:
+
+```bash
+docker compose exec bambu-run python standalone/manage.py bambu_import_colors docs/Bambu_Color_Catalog/ --dry-run
+```
+
+### What the output means
+
+```
+Processing: PLA Basic.txt  →  type='PLA'  sub_type='PLA Basic'
+  Parsed 40 color(s).
+  + 'Bambu Green' #009F87  (PLA / PLA Basic)
+  + 'Jade White'  #FFFFFF  (PLA / PLA Basic)
+  ...
+──────────────────────────────────────────────────
+  Created:              40
+  Skipped (duplicate):  0
+```
+
+- **Created** — new color entries added to the database
+- **Skipped (duplicate)** — already existed, not changed
+- **Skipped (no type)** — only shown if `--no-auto-create-filament-type` is used and the filament type isn't in the database yet

bambu_run/management/commands/bambu_collector.py

@@ -332,7 +332,6 @@ class Command(BaseCommand):
         color_code = strip_color_padding(mqtt_color)
         color_hex = f"#{color_code}" if color_code else None
 
-        color_name = mqtt_color
         filament_color = match_filament_color(
             filament_type=type_val,
             filament_sub_type=sub_type,
@@ -345,7 +344,7 @@ class Command(BaseCommand):
             if self.verbose:
                 logger.info(f"Matched color from database: {color_name} (#{color_code})")
         else:
-            color_name = mqtt_color
+            color_name = color_hex or mqtt_color
             if self.verbose:
                 logger.warning(
                     f"No color match in database for {type_val} {sub_type} #{color_code}. "

bambu_run/management/commands/bambu_import_colors.py

@@ -0,0 +1,418 @@
+"""
+Management command to import Bambu Lab filament color catalogs into the FilamentColor database.
+
+Parses .txt color catalog files (one file per filament sub-type) and creates or skips
+FilamentColor records. FilamentType records are auto-created as needed.
+
+Usage:
+    # Import a single file
+    python manage.py bambu_import_colors docs/Bambu_Color_Catalog/PLA\ Basic.txt
+
+    # Import all .txt files in a directory
+    python manage.py bambu_import_colors docs/Bambu_Color_Catalog/
+
+    # Dry-run (preview without writing)
+    python manage.py bambu_import_colors docs/Bambu_Color_Catalog/ --dry-run
+
+    # Fail instead of auto-creating missing FilamentType entries
+    python manage.py bambu_import_colors docs/Bambu_Color_Catalog/ --no-auto-create-filament-type
+
+File naming convention:
+    The stem determines filament type and sub-type:
+      PLA Basic.txt  → type=PLA,  sub_type=PLA Basic
+      PA6-GF.txt     → type=PA6,  sub_type=PA6-GF
+      ABS.txt        → type=ABS,  sub_type=ABS
+
+Supported file formats:
+    Format 1 (multi-line):    Format 2 (same-line / tab-separated):
+      Jade White                Black Walnut    #4F3F24
+      Hex:#FFFFFF               Rosewood        #4C241C
+
+    Hex values may appear as: Hex:#RRGGBB  Hex: #RRGGBB  #RRGGBB  RRGGBB
+"""
+
+import logging
+import re
+from pathlib import Path
+
+from django.core.management.base import BaseCommand, CommandError
+from django.db import transaction
+
+from bambu_run.models import FilamentColor, FilamentType
+
+logger = logging.getLogger("bambu_run.import_colors")
+
+BRAND = "Bambu Lab"
+
+# ─── Parsing helpers ──────────────────────────────────────────────────────────
+
+_SAME_LINE_RE = re.compile(
+    r'^(.+?)\s+(?:Hex\s*:\s*)?#?([0-9A-Fa-f]{6})\s*$', re.IGNORECASE
+)
+_HEX_ONLY_RE = re.compile(
+    r'^\s*(?:Hex\s*:\s*)?#?([0-9A-Fa-f]{6})\s*$', re.IGNORECASE
+)
+
+
+def _stem_to_type_and_subtype(stem):
+    """
+    Derive (filament_type, filament_sub_type) from a file stem.
+
+    The sub-type is the full stem. The type is everything before the first
+    space or hyphen.
+
+      "PLA Basic"      → ("PLA",  "PLA Basic")
+      "PA6-GF"         → ("PA6",  "PA6-GF")
+      "ABS"            → ("ABS",  "ABS")
+      "PETG HF"        → ("PETG", "PETG HF")
+    """
+    sub_type = stem
+    m = re.search(r'[ -]', stem)
+    filament_type = stem[: m.start()] if m else stem
+    return filament_type, sub_type
+
+
+def _parse_file(path):
+    """
+    Parse a color catalog file and return a list of (color_name, hex_code) tuples.
+
+    hex_code is always 6-char uppercase without '#'.
+
+    Raises ValueError if the file cannot be read.
+    """
+    try:
+        text = path.read_text(encoding="utf-8", errors="replace")
+    except OSError as exc:
+        raise ValueError(f"Cannot read file: {exc}") from exc
+
+    lines = text.splitlines()
+    colors = []
+    i = 0
+
+    while i < len(lines):
+        stripped = lines[i].strip()
+        i += 1
+
+        if not stripped:
+            continue
+
+        # ── Format 2: color name + hex on the same line ─────────────────────
+        m = _SAME_LINE_RE.match(stripped)
+        if m:
+            colors.append((m.group(1).strip(), m.group(2).upper()))
+            continue
+
+        # ── Orphaned hex line with no preceding name — skip ──────────────────
+        if _HEX_ONLY_RE.match(stripped):
+            logger.warning("  [parse] Orphaned hex line (no preceding name): '%s'", stripped)
+            continue
+
+        # ── Format 1: color name on this line, hex on the next ──────────────
+        color_name = stripped
+        found_hex = False
+
+        while i < len(lines):
+            next_stripped = lines[i].strip()
+            i += 1  # tentatively consume
+
+            if not next_stripped:
+                continue  # skip blank lines between name and hex
+
+            m_hex = _HEX_ONLY_RE.match(next_stripped)
+            if m_hex:
+                colors.append((color_name, m_hex.group(1).upper()))
+                found_hex = True
+            else:
+                # Not a hex line — put it back for the outer loop
+                i -= 1
+                logger.warning(
+                    "  [parse] Expected hex after '%s', got '%s' — skipping name",
+                    color_name,
+                    next_stripped,
+                )
+            break  # look-ahead done (one non-empty line checked)
+
+        if not found_hex:
+            logger.warning(
+                "  [parse] Color '%s' has no hex line following it — skipping", color_name
+            )
+
+    return colors
+
+
+# ─── Command ──────────────────────────────────────────────────────────────────
+
+
+class Command(BaseCommand):
+    help = (
+        "Import Bambu Lab filament color catalog .txt files into the FilamentColor database. "
+        "Accepts a single .txt file or a directory of .txt files."
+    )
+
+    def add_arguments(self, parser):
+        parser.add_argument(
+            "path",
+            help="Path to a single .txt catalog file or a directory containing .txt files.",
+        )
+        parser.add_argument(
+            "--auto-create-filament-type",
+            default=True,
+            action="store_true",
+            dest="auto_create",
+            help="Auto-create FilamentType entries when missing (default: enabled).",
+        )
+        parser.add_argument(
+            "--no-auto-create-filament-type",
+            action="store_false",
+            dest="auto_create",
+            help="Skip colors whose FilamentType entry does not exist instead of creating it.",
+        )
+        parser.add_argument(
+            "--dry-run",
+            action="store_true",
+            help="Preview what would be imported without writing to the database.",
+        )
+
+    def handle(self, *args, **options):
+        input_path = Path(options["path"]).expanduser().resolve()
+        auto_create = options["auto_create"]
+        dry_run = options["dry_run"]
+
+        if dry_run:
+            self.stdout.write(self.style.WARNING("DRY RUN — no changes will be written.\n"))
+
+        # ── Collect files to process ─────────────────────────────────────────
+        if input_path.is_dir():
+            files = sorted(input_path.glob("*.txt"))
+            if not files:
+                raise CommandError(f"No .txt files found in: {input_path}")
+            self.stdout.write(f"Found {len(files)} .txt file(s) in {input_path}\n")
+        elif input_path.is_file():
+            if input_path.suffix.lower() != ".txt":
+                raise CommandError(f"Expected a .txt file, got: {input_path.name}")
+            files = [input_path]
+        else:
+            raise CommandError(f"Path does not exist: {input_path}")
+
+        # ── Counters ─────────────────────────────────────────────────────────
+        total_created = 0
+        total_skipped_dup = 0
+        total_skipped_no_type = 0
+        total_errors = 0
+
+        for file_path in files:
+            created, skipped_dup, skipped_no_type, errors = self._process_file(
+                file_path, auto_create=auto_create, dry_run=dry_run
+            )
+            total_created += created
+            total_skipped_dup += skipped_dup
+            total_skipped_no_type += skipped_no_type
+            total_errors += errors
+
+        # ── Summary ──────────────────────────────────────────────────────────
+        self.stdout.write("\n" + "─" * 50)
+        self.stdout.write(
+            self.style.SUCCESS(f"  Created:              {total_created}")
+        )
+        self.stdout.write(f"  Skipped (duplicate):  {total_skipped_dup}")
+        if total_skipped_no_type:
+            self.stdout.write(
+                self.style.WARNING(f"  Skipped (no type):    {total_skipped_no_type}")
+            )
+        if total_errors:
+            self.stdout.write(
+                self.style.ERROR(f"  Errors:               {total_errors}")
+            )
+        if dry_run:
+            self.stdout.write(self.style.WARNING("\nDRY RUN complete — nothing was written."))
+
+    # ── Per-file processing ───────────────────────────────────────────────────
+
+    def _process_file(self, file_path, *, auto_create, dry_run):
+        """Process one catalog file. Returns (created, skipped_dup, skipped_no_type, errors)."""
+        stem = file_path.stem
+        filament_type, filament_sub_type = _stem_to_type_and_subtype(stem)
+
+        self.stdout.write(
+            f"\nProcessing: {file_path.name}  "
+            f"→  type={filament_type!r}  sub_type={filament_sub_type!r}"
+        )
+
+        # ── Parse file ───────────────────────────────────────────────────────
+        try:
+            colors = _parse_file(file_path)
+        except ValueError as exc:
+            self.stderr.write(self.style.ERROR(f"  ERROR reading file: {exc}"))
+            return 0, 0, 0, 1
+
+        if not colors:
+            self.stdout.write(self.style.WARNING("  No colors parsed — skipping file."))
+            return 0, 0, 0, 0
+
+        self.stdout.write(f"  Parsed {len(colors)} color(s).")
+
+        # ── Resolve FilamentType ─────────────────────────────────────────────
+        filament_type_obj = self._resolve_filament_type(
+            filament_type, filament_sub_type, auto_create=auto_create, dry_run=dry_run
+        )
+        if filament_type_obj is None and not auto_create:
+            self.stdout.write(
+                self.style.WARNING(
+                    f"  No FilamentType for type={filament_type!r} "
+                    f"sub_type={filament_sub_type!r} brand={BRAND!r} — "
+                    f"skipping all {len(colors)} color(s) in this file."
+                )
+            )
+            return 0, 0, len(colors), 0
+
+        # ── Import colors ────────────────────────────────────────────────────
+        created = skipped_dup = skipped_no_type = errors = 0
+
+        for color_name, hex_code in colors:
+            result = self._import_color(
+                color_name=color_name,
+                hex_code=hex_code,
+                filament_type=filament_type,
+                filament_sub_type=filament_sub_type,
+                filament_type_obj=filament_type_obj,
+                dry_run=dry_run,
+            )
+            if result == "created":
+                created += 1
+            elif result == "duplicate":
+                skipped_dup += 1
+            elif result == "no_type":
+                skipped_no_type += 1
+            elif result == "error":
+                errors += 1
+
+        self.stdout.write(
+            f"  → created={created}  duplicate={skipped_dup}  "
+            f"no_type={skipped_no_type}  errors={errors}"
+        )
+        return created, skipped_dup, skipped_no_type, errors
+
+    def _resolve_filament_type(self, filament_type, filament_sub_type, *, auto_create, dry_run):
+        """
+        Return the matching FilamentType instance.
+
+        If none exists:
+          - auto_create=True  → create it (or simulate in dry-run) and return it
+          - auto_create=False → return None
+        """
+        try:
+            obj = FilamentType.objects.get(
+                type=filament_type,
+                sub_type=filament_sub_type,
+                brand=BRAND,
+            )
+            return obj
+        except FilamentType.DoesNotExist:
+            pass
+
+        if not auto_create:
+            return None
+
+        if dry_run:
+            self.stdout.write(
+                self.style.NOTICE(
+                    f"  [dry-run] Would create FilamentType: "
+                    f"type={filament_type!r} sub_type={filament_sub_type!r} brand={BRAND!r}"
+                )
+            )
+            return None  # can't return a real object in dry-run
+
+        try:
+            with transaction.atomic():
+                obj, created = FilamentType.objects.get_or_create(
+                    type=filament_type,
+                    sub_type=filament_sub_type,
+                    brand=BRAND,
+                )
+            if created:
+                self.stdout.write(
+                    self.style.SUCCESS(
+                        f"  Created FilamentType: "
+                        f"type={filament_type!r} sub_type={filament_sub_type!r} brand={BRAND!r}"
+                    )
+                )
+            return obj
+        except Exception as exc:
+            self.stderr.write(
+                self.style.ERROR(
+                    f"  ERROR creating FilamentType "
+                    f"(type={filament_type!r} sub_type={filament_sub_type!r}): {exc}"
+                )
+            )
+            return None
+
+    def _import_color(
+        self,
+        *,
+        color_name,
+        hex_code,
+        filament_type,
+        filament_sub_type,
+        filament_type_obj,
+        dry_run,
+    ):
+        """
+        Import a single (color_name, hex_code) entry.
+
+        Returns one of: "created", "duplicate", "no_type", "error"
+        """
+        if filament_type_obj is None:
+            # dry-run path: FilamentType would have been created but isn't real yet
+            if dry_run:
+                self.stdout.write(
+                    f"  [dry-run] Would create: {color_name!r} #{hex_code}  "
+                    f"({filament_type} / {filament_sub_type})"
+                )
+                return "created"
+            return "no_type"
+
+        # ── Duplicate check ──────────────────────────────────────────────────
+        # All five fields must match to be considered a duplicate:
+        #   color_code (exact), color_name (case-insensitive), brand,
+        #   denormalised filament_type + filament_sub_type
+        duplicate = FilamentColor.objects.filter(
+            color_code=hex_code,
+            color_name__iexact=color_name,
+            brand=BRAND,
+            filament_type=filament_type,
+            filament_sub_type=filament_sub_type,
+        ).exists()
+
+        if duplicate:
+            logger.debug("  Duplicate — skipping: %s #%s", color_name, hex_code)
+            return "duplicate"
+
+        if dry_run:
+            self.stdout.write(
+                f"  [dry-run] Would create: {color_name!r} #{hex_code}  "
+                f"({filament_type} / {filament_sub_type})"
+            )
+            return "created"
+
+        # ── Write to database ────────────────────────────────────────────────
+        try:
+            with transaction.atomic():
+                FilamentColor.objects.create(
+                    color_code=hex_code,
+                    color_name=color_name,
+                    filament_type_fk=filament_type_obj,
+                    filament_type=filament_type,
+                    filament_sub_type=filament_sub_type,
+                    brand=BRAND,
+                )
+            self.stdout.write(
+                f"  + {color_name!r} #{hex_code}  ({filament_type} / {filament_sub_type})"
+            )
+            return "created"
+        except Exception as exc:
+            self.stderr.write(
+                self.style.ERROR(
+                    f"  ERROR saving {color_name!r} #{hex_code}: {exc}"
+                )
+            )
+            return "error"

bambu_run/static/bambu_run/js/filament_detail.js

@@ -0,0 +1,302 @@
+// Filament Detail Chart — Usage History
+// Depends on: chart.js, chartjs-plugin-annotation
+// Config injected by template: FILAMENT_USAGE_API_URL
+
+let usageChart = null;
+
+// Register annotation plugin once it's available
+if (typeof ChartAnnotation !== 'undefined') {
+    Chart.register(ChartAnnotation);
+}
+
+// ── Time-select population ──────────────────────────────────────────────────
+
+const startTimeSelect = document.getElementById('filamentStartTime');
+const endTimeSelect   = document.getElementById('filamentEndTime');
+if (startTimeSelect && endTimeSelect) {
+    for (let h = 0; h < 24; h++) {
+        for (let m = 0; m < 60; m += 30) {
+            const t = `${String(h).padStart(2, '0')}:${String(m).padStart(2, '0')}`;
+            startTimeSelect.add(new Option(t, t));
+            endTimeSelect.add(new Option(t, t));
+        }
+    }
+    // End-time gets one extra option so the last minute of the day is reachable
+    endTimeSelect.add(new Option('23:59', '23:59'));
+    startTimeSelect.value = '00:00';
+    endTimeSelect.value   = '23:59';
+}
+
+// ── Default date inputs (last 24 h) ────────────────────────────────────────
+
+(function setDefaultDates() {
+    const now       = new Date();
+    const yesterday = new Date(now.getTime() - 24 * 60 * 60 * 1000);
+    const sd = document.getElementById('filamentStartDate');
+    const ed = document.getElementById('filamentEndDate');
+    if (sd) sd.value = yesterday.toISOString().split('T')[0];
+    if (ed) ed.value = now.toISOString().split('T')[0];
+}());
+
+// ── Full-day checkbox ───────────────────────────────────────────────────────
+
+const fullDayCheckbox = document.getElementById('filamentFullDayCheckbox');
+if (fullDayCheckbox) {
+    fullDayCheckbox.addEventListener('change', function () {
+        const isFullDay = this.checked;
+        if (startTimeSelect) startTimeSelect.disabled = isFullDay;
+        if (endTimeSelect)   endTimeSelect.disabled   = isFullDay;
+    });
+}
+
+// ── Helpers ─────────────────────────────────────────────────────────────────
+
+/**
+ * Build date-separator annotations from "YYYY-MM-DD HH:MM" timestamp strings.
+ * Places a vertical dotted line at each day boundary, label at the bottom.
+ */
+function buildFilamentDateSeparators(timestamps) {
+    const annotations = {};
+    if (!timestamps || timestamps.length < 2) return annotations;
+    let count = 0;
+    for (let i = 1; i < timestamps.length; i++) {
+        const prevDate = timestamps[i - 1].split(' ')[0];
+        const currDate = timestamps[i].split(' ')[0];
+        if (currDate !== prevDate) {
+            const d     = new Date(currDate + 'T00:00:00');
+            const label = d.toLocaleDateString('en-US', { month: 'short', day: 'numeric' });
+            annotations['dateSep_' + count] = {
+                type:       'line',
+                scaleID:    'x',
+                value:      i,
+                borderColor: 'rgba(128, 128, 128, 0.45)',
+                borderWidth: 1,
+                borderDash:  [4, 4],
+                drawTime:   'beforeDatasetsDraw',
+                label: {
+                    display:         true,
+                    content:         label,
+                    position:        'end',
+                    backgroundColor: 'rgba(100, 100, 100, 0.65)',
+                    color:           '#fff',
+                    font:            { size: 9 },
+                    padding:         { x: 4, y: 2 }
+                }
+            };
+            count++;
+        }
+    }
+    return annotations;
+}
+
+/**
+ * Build x-axis tick options that adapt to the date span.
+ *
+ * autoSkip: true — Chart.js selects evenly-spaced tick positions.
+ * maxTicksLimit  — caps how many ticks are drawn.
+ * callback       — formats the label at each chosen tick position.
+ *
+ * ≤1 day  : up to 12 ticks, show "HH:MM"
+ * 2–7 days: up to dayCount×4 ticks (≤28), show "Feb 22 06:00"
+ * >7 days : up to min(dayCount, 20) ticks, show "Feb 22"
+ */
+function filamentXAxisTicks(isDarkMode, timestamps) {
+    const tickColor = isDarkMode ? 'rgba(255,255,255,0.8)' : 'rgba(0,0,0,0.8)';
+
+    const dayCount = (timestamps && timestamps.length > 0)
+        ? new Set(timestamps.map(t => t.split(' ')[0])).size
+        : 1;
+
+    let maxTicksLimit, formatCb;
+
+    if (dayCount <= 1) {
+        maxTicksLimit = 12;
+        formatCb = function (val) {
+            const label = this.getLabelForValue(val);
+            return label ? label.slice(11, 16) : ''; // "HH:MM"
+        };
+    } else if (dayCount <= 7) {
+        maxTicksLimit = Math.min(dayCount * 4, 28);
+        formatCb = function (val) {
+            const label = this.getLabelForValue(val);
+            if (!label) return '';
+            const datePart = label.split(' ')[0];
+            const timePart = label.length >= 16 ? label.slice(11, 16) : '';
+            const d = new Date(datePart + 'T00:00:00');
+            return d.toLocaleDateString('en-US', { month: 'short', day: 'numeric' }) + ' ' + timePart;
+        };
+    } else {
+        maxTicksLimit = Math.min(dayCount, 20);
+        formatCb = function (val) {
+            const label = this.getLabelForValue(val);
+            if (!label) return '';
+            const datePart = label.split(' ')[0];
+            const d = new Date(datePart + 'T00:00:00');
+            return d.toLocaleDateString('en-US', { month: 'short', day: 'numeric' });
+        };
+    }
+
+    return {
+        color:         tickColor,
+        autoSkip:      true,
+        maxTicksLimit: maxTicksLimit,
+        maxRotation:   45,
+        minRotation:   0,
+        callback:      formatCb
+    };
+}
+
+// ── Chart fetch / render ────────────────────────────────────────────────────
+
+/**
+ * Fetch and render the usage chart.
+ *
+ * @param {boolean} sendDates  When false (initial load / reset), no date params
+ *                             are sent so the backend can apply its default
+ *                             "last 24h or fallback to last available" logic.
+ *                             When true (explicit Refresh), the current input
+ *                             values are sent as-is.
+ */
+async function fetchFilamentUsageData(sendDates = true) {
+    const startDate = document.getElementById('filamentStartDate').value;
+    const endDate   = document.getElementById('filamentEndDate').value;
+    const isFullDay = fullDayCheckbox ? fullDayCheckbox.checked : true;
+    const startTime = isFullDay ? '00:00' : (startTimeSelect ? startTimeSelect.value : '00:00');
+    const endTime   = isFullDay ? '23:59' : (endTimeSelect   ? endTimeSelect.value   : '23:59');
+
+    const params = new URLSearchParams();
+    if (sendDates) {
+        if (startDate) params.append('start_date', startDate);
+        if (endDate)   params.append('end_date',   endDate);
+        if (startTime) params.append('start_time', startTime);
+        if (endTime)   params.append('end_time',   endTime);
+    }
+
+    try {
+        const response = await fetch(FILAMENT_USAGE_API_URL + '?' + params.toString());
+        const data     = await response.json();
+
+        // If the backend used the fallback window, sync the date inputs so the
+        // user can see and extend the range from that starting point.
+        if (data.fallback_used && data.timestamps && data.timestamps.length > 0) {
+            const firstDate = data.timestamps[0].split(' ')[0];
+            const lastDate  = data.timestamps[data.timestamps.length - 1].split(' ')[0];
+            const sd = document.getElementById('filamentStartDate');
+            const ed = document.getElementById('filamentEndDate');
+            if (sd) sd.value = firstDate;
+            if (ed) ed.value = lastDate;
+        }
+
+        // Update date-range label
+        const dateRangeSpan = document.getElementById('filamentDateRange');
+        if (dateRangeSpan) {
+            if (data.fallback_used) {
+                dateRangeSpan.textContent = '(Last available data — 24h window)';
+            } else if (startDate && endDate && sendDates) {
+                dateRangeSpan.textContent = `(${startDate} to ${endDate})`;
+            } else {
+                dateRangeSpan.textContent = '(Last 24 Hours)';
+            }
+        }
+
+        const isDarkMode  = document.documentElement.getAttribute('data-coreui-theme') === 'dark';
+        const tickColor   = isDarkMode ? 'rgba(255,255,255,0.8)' : 'rgba(0,0,0,0.8)';
+        const gridColor   = isDarkMode ? 'rgba(255,255,255,0.1)' : 'rgba(0,0,0,0.1)';
+        const sepAnnotations = buildFilamentDateSeparators(data.timestamps);
+        const xTicks      = filamentXAxisTicks(isDarkMode, data.timestamps);
+
+        if (usageChart) {
+            usageChart.data.labels                                  = data.timestamps;
+            usageChart.data.datasets[0].data                       = data.remaining;
+            usageChart.options.plugins.annotation.annotations      = sepAnnotations;
+            usageChart.options.scales.x.ticks                      = xTicks;
+            usageChart.update();
+        } else {
+            const ctx = document.getElementById('usageChart').getContext('2d');
+            usageChart = new Chart(ctx, {
+                type: 'line',
+                data: {
+                    labels: data.timestamps,
+                    datasets: [{
+                        label:           'Remaining %',
+                        data:            data.remaining,
+                        borderColor:     'rgb(75, 192, 192)',
+                        backgroundColor: 'rgba(75, 192, 192, 0.1)',
+                        tension:         0.3,
+                        fill:            true,
+                        pointRadius:     0,
+                        pointHoverRadius: 3,
+                        borderWidth:     2
+                    }]
+                },
+                options: {
+                    responsive:          true,
+                    maintainAspectRatio: false,
+                    interaction:         { mode: 'index', intersect: false },
+                    plugins: {
+                        annotation: { annotations: sepAnnotations },
+                        legend: {
+                            position: 'top',
+                            labels:   { color: tickColor }
+                        },
+                        tooltip: {
+                            callbacks: {
+                                label: function (ctx) {
+                                    return 'Remaining: ' + ctx.parsed.y + '%';
+                                }
+                            }
+                        }
+                    },
+                    scales: {
+                        x: {
+                            ticks: xTicks,
+                            grid:  { color: gridColor }
+                        },
+                        y: {
+                            beginAtZero: true,
+                            max: 100,
+                            ticks: {
+                                color:    tickColor,
+                                callback: function (v) { return v + '%'; }
+                            },
+                            grid: { color: gridColor }
+                        }
+                    }
+                }
+            });
+        }
+    } catch (error) {
+        console.error('Error fetching filament usage data:', error);
+    }
+}
+
+// ── Event listeners ─────────────────────────────────────────────────────────
+
+const refreshBtn = document.getElementById('refreshFilamentChart');
+const resetBtn   = document.getElementById('resetFilamentChart');
+
+if (refreshBtn) {
+    // Refresh: honour whatever the user has typed in the date inputs
+    refreshBtn.addEventListener('click', function () { fetchFilamentUsageData(true); });
+}
+
+if (resetBtn) {
+    resetBtn.addEventListener('click', function () {
+        // Reset inputs to "last 24 hours" defaults, then let the backend
+        // decide (fallback if no recent data).
+        const now       = new Date();
+        const yesterday = new Date(now.getTime() - 24 * 60 * 60 * 1000);
+        const sd = document.getElementById('filamentStartDate');
+        const ed = document.getElementById('filamentEndDate');
+        if (sd) sd.value = yesterday.toISOString().split('T')[0];
+        if (ed) ed.value = now.toISOString().split('T')[0];
+        if (fullDayCheckbox) fullDayCheckbox.checked = true;
+        if (startTimeSelect) startTimeSelect.disabled = true;
+        if (endTimeSelect)   endTimeSelect.disabled   = true;
+        fetchFilamentUsageData(false);
+    });
+}
+
+// ── Initial load — no dates so backend fallback can fire ───────────────────
+
+fetchFilamentUsageData(false);

bambu_run/static/bambu_run/js/printer_charts.js

@@ -55,7 +55,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 },
                 {
@@ -67,7 +67,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 }
             ]
@@ -90,7 +90,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 },
                 {
@@ -102,7 +102,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 }
             ]
@@ -125,7 +125,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     fill: true
                 }
             ]
@@ -148,7 +148,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 },
                 {
@@ -159,7 +159,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 }
             ]
@@ -182,7 +182,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 }
             ]
@@ -246,7 +246,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     yAxisID: 'y',
                     spanGaps: true
                 },
@@ -258,7 +258,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     yAxisID: 'y1',
                     spanGaps: true
                 }
@@ -342,7 +342,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     fill: true
                 },
                 {
@@ -354,7 +354,7 @@ function initPrinterCharts(printerData, apiUrl) {
                     tension: 0.3,
                     borderWidth: 2,
                     pointRadius: 0,
-                    pointHoverRadius: 5,
+                    pointHoverRadius: 3,
                     spanGaps: true
                 }
             ]
@@ -452,6 +452,11 @@ function initPrinterCharts(printerData, apiUrl) {
         }
     });
 
+    // Add date separator markers when data spans multiple days
+    if (printerData.dates && printerData.dates.length > 0) {
+        applyDateSeparatorsToAllPrinterCharts(printerData.timestamps, printerData.dates);
+    }
+
     // Set up theme observer for dynamic theme switching
     setupThemeObserver();
 }
@@ -623,7 +628,7 @@ function createFilamentDatasets(filamentTimeline, timestamps) {
             tension: 0.3,
             borderWidth: 2,
             pointRadius: 0,
-            pointHoverRadius: 5,
+            pointHoverRadius: 3,
             spanGaps: false  // Don't connect across null values (filament changes)
         });
     });
@@ -731,3 +736,79 @@ function setupThemeObserver() {
         attributeFilter: ['data-coreui-theme']
     });
 }
+
+/**
+ * Build date-separator annotations for multi-day charts.
+ * Detects where consecutive dates differ and returns a vertical dotted line
+ * annotation at each boundary index, labelled with the new date.
+ *
+ * @param {string[]} timestamps - HH:MM display labels (one per data point)
+ * @param {string[]} dates      - YYYY-MM-DD dates (same length as timestamps)
+ * @returns {Object} chartjs-plugin-annotation annotations keyed as "dateSep_N"
+ */
+function buildDateSeparatorAnnotations(timestamps, dates) {
+    const annotations = {};
+    if (!dates || dates.length < 2) return annotations;
+
+    let count = 0;
+    for (let i = 1; i < dates.length; i++) {
+        if (dates[i] !== dates[i - 1]) {
+            // Format date as "Feb 25" for a compact label
+            const d = new Date(dates[i] + 'T00:00:00');
+            const label = d.toLocaleDateString('en-US', { month: 'short', day: 'numeric' });
+
+            annotations['dateSep_' + count] = {
+                type: 'line',
+                scaleID: 'x',
+                value: i,
+                borderColor: 'rgba(128, 128, 128, 0.45)',
+                borderWidth: 1,
+                borderDash: [4, 4],
+                drawTime: 'beforeDatasetsDraw',
+                label: {
+                    display: true,
+                    content: label,
+                    position: 'end',
+                    backgroundColor: 'rgba(100, 100, 100, 0.65)',
+                    color: '#fff',
+                    font: { size: 9 },
+                    padding: { x: 4, y: 2 }
+                }
+            };
+            count++;
+        }
+    }
+    return annotations;
+}
+
+/**
+ * Apply date-separator annotations to all printer charts.
+ * Preserves any existing "marker_*" (project marker) annotations.
+ *
+ * @param {string[]} timestamps
+ * @param {string[]} dates
+ */
+function applyDateSeparatorsToAllPrinterCharts(timestamps, dates) {
+    const sepAnnotations = buildDateSeparatorAnnotations(timestamps, dates);
+
+    const charts = [
+        nozzleTempChart, bedTempChart, printProgressChart, fanSpeedsChart,
+        wifiSignalChart, amsConditionsChart, layerProgressChart, filamentTimelineChart
+    ];
+
+    charts.forEach(chart => {
+        if (!chart) return;
+        if (!chart.options.plugins.annotation) {
+            chart.options.plugins.annotation = { annotations: {} };
+        }
+        const existing = chart.options.plugins.annotation.annotations;
+
+        // Remove any old dateSep_* entries then re-add updated ones
+        Object.keys(existing).forEach(key => {
+            if (key.startsWith('dateSep_')) delete existing[key];
+        });
+        Object.assign(existing, sepAnnotations);
+
+        chart.update('none');
+    });
+}

bambu_run/static/bambu_run/js/printer_charts_control.js

@@ -77,11 +77,12 @@ function populateTimeDropdowns(startSelect, endSelect) {
     }
 
     times.forEach(time => {
-        const option1 = new Option(time, time);
+        startSelect.add(new Option(time, time));
-        const option2 = new Option(time, time);
+        endSelect.add(new Option(time, time));
-        startSelect.add(option1);
-        endSelect.add(option2);
     });
+
+    // End-time gets one extra option so the last minute of the day is reachable
+    endSelect.add(new Option('23:59', '23:59'));
 }
 
 /**
@@ -235,6 +236,11 @@ function updateAllPrinterCharts(data) {
         filamentTimelineChart.update();
     }
 
+    // Apply date separator markers (multi-day views)
+    if (data.dates && data.dates.length > 0) {
+        applyDateSeparatorsToAllPrinterCharts(data.timestamps, data.dates);
+    }
+
     // Add project markers to all charts
     if (data.project_markers) {
         addProjectMarkersToCharts(data.project_markers, data.timestamps);
@@ -275,8 +281,11 @@ function addProjectMarkersToCharts(markers, timestamps) {
             chart.options.plugins.annotation = { annotations: {} };
         }
 
-        // Clear existing project markers
+        // Clear existing project markers but preserve date-separator annotations
-        chart.options.plugins.annotation.annotations = {};
+        const allAnnotations = chart.options.plugins.annotation.annotations;
+        Object.keys(allAnnotations).forEach(key => {
+            if (!key.startsWith('dateSep_')) delete allAnnotations[key];
+        });
 
         // Track active tooltip
         let activeMarkerTooltip = null;

bambu_run/templates/bambu_run/filament_color_list.html

@@ -9,9 +9,11 @@
             <p class="text-muted">Manage filament colors for auto-matching</p>
         </div>
         <div class="col-md-4 text-end">
+            {% if not is_basic_user %}
             <a href="{% url 'bambu_run:filament_color_create' %}" class="btn btn-primary">
                 <i class="bi bi-plus-circle"></i> Add New Color
             </a>
+            {% endif %}
             <a href="{% url 'bambu_run:filament_list' %}" class="btn btn-outline-secondary">
                 <i class="bi bi-arrow-left"></i> Back to Inventory
             </a>
@@ -70,8 +72,10 @@
                             </td>
                             <td class="align-middle">{{ color.brand }}</td>
                             <td class="align-middle">
+                                {% if not is_basic_user %}
                                 <a href="{% url 'bambu_run:filament_color_update' color.pk %}" class="btn btn-sm btn-warning">Edit</a>
                                 <a href="{% url 'bambu_run:filament_color_delete' color.pk %}" class="btn btn-sm btn-danger">Delete</a>
+                                {% endif %}
                             </td>
                         </tr>
                         {% empty %}

bambu_run/templates/bambu_run/filament_detail.html

@@ -13,7 +13,9 @@
             <p class="text-body-secondary">Filament Spool Details</p>
         </div>
         <div class="col-auto">
+            {% if not is_basic_user %}
             <a href="{% url 'bambu_run:filament_update' filament.pk %}" class="btn btn-warning">Edit</a>
+            {% endif %}
             <a href="{% url 'bambu_run:filament_list' %}" class="btn btn-secondary">Back to List</a>
         </div>
     </div>
@@ -78,10 +80,11 @@
 
     <!-- Usage Chart -->
     <div class="card mb-4">
+        {% if not is_basic_user %}
         <div class="card-header">
             <div class="d-flex justify-content-between align-items-center flex-wrap gap-2">
                 <div>
-                    <strong>Chart Filters</strong>
+                    <strong>Filament Usage History</strong>
                     <span class="text-muted" id="filamentDateRange">(Last 24 Hours)</span>
                 </div>
                 <div class="d-flex align-items-center gap-2 flex-wrap">
@@ -108,16 +111,17 @@
                     </div>
                     <!-- Buttons -->
                     <button type="button" class="btn btn-primary btn-sm" id="refreshFilamentChart">
-                        <svg class="icon"><use xlink:href="https://cdn.jsdelivr.net/npm/@coreui/icons@3.0.1/sprites/free.svg#cil-reload"></use></svg>
+                        <svg class="icon"><use href="{% static 'bambu_run/vendors/coreui-icons-free.svg' %}#cil-reload"></use></svg>
                         Refresh
                     </button>
                     <button type="button" class="btn btn-secondary btn-sm" id="resetFilamentChart">
-                        <svg class="icon"><use xlink:href="https://cdn.jsdelivr.net/npm/@coreui/icons@3.0.1/sprites/free.svg#cil-action-undo"></use></svg>
+                        <svg class="icon"><use href="{% static 'bambu_run/vendors/coreui-icons-free.svg' %}#cil-action-undo"></use></svg>
                         Reset
                     </button>
                 </div>
             </div>
         </div>
+        {% endif %}
         <div class="card-body">
             <div class="chart-container" style="height: 300px;">
                 <canvas id="usageChart"></canvas>
@@ -199,113 +203,42 @@
 
 {% block extra_js %}
 <script src="https://cdn.jsdelivr.net/npm/chart.js@4.4.0"></script>
+<script src="https://cdn.jsdelivr.net/npm/chartjs-plugin-annotation@3.0.1"></script>
+{% if not is_basic_user %}
+{# Inject Django-specific values that the static JS file cannot know #}
 <script>
-    const filamentId = {{ filament.pk }};
+    const FILAMENT_USAGE_API_URL = "{% url 'bambu_run:filament_usage_api' filament.pk %}";
-    let usageChart = null;
+</script>
-
+<script src="{% static 'bambu_run/js/filament_detail.js' %}"></script>
-    // Populate time selects
+{% else %}
-    const startTimeSelect = document.getElementById('filamentStartTime');
+<script>
-    const endTimeSelect = document.getElementById('filamentEndTime');
+    document.addEventListener('DOMContentLoaded', function () {
-    for (let h = 0; h < 24; h++) {
+        const ctx = document.getElementById('usageChart');
-        for (let m = 0; m < 60; m += 30) {
+        if (ctx) {
-            const timeStr = `${h.toString().padStart(2, '0')}:${m.toString().padStart(2, '0')}`;
+            new Chart(ctx.getContext('2d'), {
-            startTimeSelect.add(new Option(timeStr, timeStr));
-            endTimeSelect.add(new Option(timeStr, timeStr));
-        }
-    }
-    startTimeSelect.value = '00:00';
-    endTimeSelect.value = '23:30';
-
-    // Initialize date inputs to last 24 hours
-    const now = new Date();
-    const yesterday = new Date(now.getTime() - 24 * 60 * 60 * 1000);
-    document.getElementById('filamentStartDate').value = yesterday.toISOString().split('T')[0];
-    document.getElementById('filamentEndDate').value = now.toISOString().split('T')[0];
-
-    // Full day checkbox handler
-    document.getElementById('filamentFullDayCheckbox').addEventListener('change', function() {
-        const isFullDay = this.checked;
-        startTimeSelect.disabled = isFullDay;
-        endTimeSelect.disabled = isFullDay;
-    });
-
-    // Fetch and render chart
-    async function fetchFilamentUsageData() {
-        const startDate = document.getElementById('filamentStartDate').value;
-        const endDate = document.getElementById('filamentEndDate').value;
-        const isFullDay = document.getElementById('filamentFullDayCheckbox').checked;
-        const startTime = isFullDay ? '00:00' : startTimeSelect.value;
-        const endTime = isFullDay ? '23:59' : endTimeSelect.value;
-
-        const params = new URLSearchParams();
-        if (startDate) params.append('start_date', startDate);
-        if (endDate) params.append('end_date', endDate);
-        if (startTime) params.append('start_time', startTime);
-        if (endTime) params.append('end_time', endTime);
-
-        try {
-            const response = await fetch(`{% url 'bambu_run:filament_usage_api' filament.pk %}?${params.toString()}`);
-            const data = await response.json();
-
-            // Update date range display
-            const dateRangeSpan = document.getElementById('filamentDateRange');
-            if (startDate && endDate) {
-                dateRangeSpan.textContent = `(${startDate} to ${endDate})`;
-            } else {
-                dateRangeSpan.textContent = '(Last 24 Hours)';
-            }
-
-            // Update chart
-            if (usageChart) {
-                usageChart.data.labels = data.timestamps;
-                usageChart.data.datasets[0].data = data.remaining;
-                usageChart.update();
-            } else {
-                const ctx = document.getElementById('usageChart').getContext('2d');
-                usageChart = new Chart(ctx, {
                 type: 'line',
                 data: {
-                        labels: data.timestamps,
+                    labels: [],
                     datasets: [{
                         label: 'Remaining %',
-                            data: data.remaining,
+                        data: [],
                         borderColor: 'rgb(75, 192, 192)',
                         backgroundColor: 'rgba(75, 192, 192, 0.1)',
                         tension: 0.3,
-                            fill: true
+                        fill: true,
+                        pointRadius: 0,
+                        pointHoverRadius: 3,
+                        borderWidth: 2
                     }]
                 },
                 options: {
                     responsive: true,
                     maintainAspectRatio: false,
-                        scales: {
+                    scales: { y: { beginAtZero: true, max: 100 } }
-                            y: {
-                                beginAtZero: true,
-                                max: 100
-                            }
-                        }
                 }
             });
         }
-        } catch (error) {
-            console.error('Error fetching filament usage data:', error);
-        }
-    }
-
-    // Event listeners
-    document.getElementById('refreshFilamentChart').addEventListener('click', fetchFilamentUsageData);
-    document.getElementById('resetFilamentChart').addEventListener('click', function() {
-        const now = new Date();
-        const yesterday = new Date(now.getTime() - 24 * 60 * 60 * 1000);
-        document.getElementById('filamentStartDate').value = yesterday.toISOString().split('T')[0];
-        document.getElementById('filamentEndDate').value = now.toISOString().split('T')[0];
-        document.getElementById('filamentFullDayCheckbox').checked = true;
-        startTimeSelect.disabled = true;
-        endTimeSelect.disabled = true;
-        fetchFilamentUsageData();
     });
-
-    // Initial load
-    fetchFilamentUsageData();
 </script>
+{% endif %}
 {% endblock %}

bambu_run/templates/bambu_run/filament_form.html

@@ -145,7 +145,7 @@
                         <button type="submit" class="btn btn-primary">Save</button>
                         <a href="{% url 'bambu_run:filament_list' %}" class="btn btn-secondary">Cancel</a>
                     </div>
-                    {% if form.instance.pk %}
+                    {% if form.instance.pk and not is_basic_user %}
                     <button type="button" class="btn btn-danger" data-bs-toggle="modal" data-bs-target="#deleteModal" id="deleteBtn">
                         <i class="bi bi-trash-fill me-1"></i>Delete
                     </button>

bambu_run/templates/bambu_run/filament_list.html

@@ -12,6 +12,7 @@
             <h1>Filament Inventory</h1>
             <p class="text-body-secondary">Manage your 3D printer filament spools</p>
         </div>
+        {% if not is_basic_user %}
         <div class="col-auto">
             <a href="{% url 'bambu_run:filament_type_list' %}" class="btn btn-outline-info me-2">
                 <i class="bi bi-list-ul"></i> Manage Types
@@ -23,6 +24,7 @@
                 <i class="bi bi-plus-circle"></i> Add Filament
             </a>
         </div>
+        {% endif %}
     </div>
 
     <!-- Summary Cards -->
@@ -158,7 +160,9 @@
                             <td class="align-middle">{{ filament.last_used|date:"Y-m-d H:i"|default:"Never" }}</td>
                             <td class="align-middle">
                                 <a href="{% url 'bambu_run:filament_detail' filament.pk %}" class="btn btn-sm btn-info">View</a>
+                                {% if not is_basic_user %}
                                 <a href="{% url 'bambu_run:filament_update' filament.pk %}" class="btn btn-sm btn-warning">Edit</a>
+                                {% endif %}
                             </td>
                         </tr>
                         {% empty %}

bambu_run/templates/bambu_run/filament_type_list.html

@@ -9,9 +9,11 @@
             <p class="text-muted">Manage filament types (material, sub-type, brand)</p>
         </div>
         <div class="col-md-4 text-end">
+            {% if not is_basic_user %}
             <a href="{% url 'bambu_run:filament_type_create' %}" class="btn btn-primary">
                 <i class="bi bi-plus-circle"></i> Add New Type
             </a>
+            {% endif %}
             <a href="{% url 'bambu_run:filament_list' %}" class="btn btn-outline-secondary">
                 <i class="bi bi-arrow-left"></i> Back to Inventory
             </a>
@@ -60,8 +62,10 @@
                             </td>
                             <td class="align-middle">{{ ft.brand }}</td>
                             <td class="align-middle">
+                                {% if not is_basic_user %}
                                 <a href="{% url 'bambu_run:filament_type_update' ft.pk %}" class="btn btn-sm btn-warning">Edit</a>
                                 <a href="{% url 'bambu_run:filament_type_delete' ft.pk %}" class="btn btn-sm btn-danger">Delete</a>
+                                {% endif %}
                             </td>
                         </tr>
                         {% empty %}

bambu_run/templates/bambu_run/printer_dashboard.html

@@ -203,6 +203,7 @@
     </div>
 
     <!-- Date/Time Filter Controls -->
+    {% if not is_basic_user %}
     <div class="row mb-4">
         <div class="col-12">
             <div class="card">
@@ -247,6 +248,7 @@
             </div>
         </div>
     </div>
+    {% endif %}
 
     <!-- Filament Timeline Chart - Full Width -->
     <div class="row g-3 mb-4">
@@ -372,6 +374,7 @@
 <script src="https://cdn.jsdelivr.net/npm/chartjs-plugin-annotation@3.0.1"></script>
 <script src="{% static 'bambu_run/js/printer_charts.js' %}"></script>
 <script src="{% static 'bambu_run/js/printer_charts_control.js' %}"></script>
+{% if not is_basic_user %}
 <div id="printerApiUrl" data-url="{% url 'bambu_run:printer_api' %}" style="display: none;"></div>
 <script>
     document.addEventListener('DOMContentLoaded', function() {
@@ -387,4 +390,18 @@
         }
     });
 </script>
+{% else %}
+<script>
+    document.addEventListener('DOMContentLoaded', function() {
+        const printerData = {{ printer_data_json|safe }};
+        initPrinterCharts(printerData, null);
+
+        if (printerData.project_markers && printerData.project_markers.length > 0) {
+            setTimeout(function() {
+                addProjectMarkersToCharts(printerData.project_markers, printerData.timestamps);
+            }, 500);
+        }
+    });
+</script>
+{% endif %}
 {% endblock %}

bambu_run/utils.py

@@ -2,6 +2,10 @@
 Utility functions for filament color matching
 """
 
+# BambuLab AMS reports colors as 8-char hex with an alpha channel suffix (e.g. '489FDFFF').
+# The last two chars are always 'FF' (fully opaque). Only the first 6 chars are the RGB value.
+MQTT_COLOR_HEX_LENGTH = 6
+
 
 def strip_color_padding(mqtt_color):
     """
@@ -12,8 +16,8 @@ def strip_color_padding(mqtt_color):
     if not mqtt_color:
         return None
     if len(mqtt_color) == 8:
-        return mqtt_color[:6].upper()
+        return mqtt_color[:MQTT_COLOR_HEX_LENGTH].upper()
-    return mqtt_color[:6].upper() if len(mqtt_color) >= 6 else mqtt_color.upper()
+    return mqtt_color[:MQTT_COLOR_HEX_LENGTH].upper() if len(mqtt_color) >= MQTT_COLOR_HEX_LENGTH else mqtt_color.upper()
 
 
 def match_filament_color(filament_type, filament_sub_type, color_code, brand='Bambu Lab'):

bambu_run/views.py

@@ -1,4 +1,4 @@
-from datetime import timedelta
+from datetime import timedelta, datetime
 from django.views.generic import TemplateView, View, ListView, CreateView, UpdateView, DetailView, DeleteView
 from django.contrib.auth.mixins import LoginRequiredMixin
 from django.utils import timezone
@@ -13,10 +13,27 @@ from .conf import app_settings
 from .models import Printer, PrinterMetrics, Filament, FilamentColor, FilamentType, FilamentSnapshot, PrintJob, FilamentUsage
 from .forms import FilamentForm, FilamentColorForm, FilamentTypeForm
 
+_METRICS_API_FIELDS = [
+    'id', 'device_id', 'timestamp',
+    'nozzle_temp', 'nozzle_target_temp',
+    'bed_temp', 'bed_target_temp',
+    'print_percent', 'cooling_fan_speed', 'heatbreak_fan_speed',
+    'wifi_signal_dbm', 'ams_humidity_raw', 'ams_temp',
+    'layer_num', 'total_layer_num',
+    'gcode_state', 'print_type', 'subtask_name',
+    'external_spool',
+]
+_MAX_CHART_POINTS = 3000
+
 
 class PrinterDashboardView(LoginRequiredMixin, TemplateView):
     template_name = "bambu_run/printer_dashboard.html"
 
+    def _get_date_range(self, request):
+        """Return (start_dt, end_dt) for the dashboard query. Override for custom date logic."""
+        time_24h_ago = timezone.now() - timedelta(hours=24)
+        return time_24h_ago, None  # None means "now"
+
     def get_context_data(self, **kwargs):
         context = super().get_context_data(**kwargs)
         context['bambu_run_base_template'] = app_settings.BASE_TEMPLATE
@@ -34,11 +51,14 @@ class PrinterDashboardView(LoginRequiredMixin, TemplateView):
 
         tz = zoneinfo.ZoneInfo(app_settings.TIMEZONE)
 
-        # Last 24 hours of live data
+        # Get date range (overridable by subclasses)
-        time_24h_ago = timezone.now() - timedelta(hours=24)
+        start_dt, end_dt = self._get_date_range(self.request)
         metrics = PrinterMetrics.objects.filter(
-            device=printer_device, timestamp__gte=time_24h_ago
+            device=printer_device, timestamp__gte=start_dt
-        ).prefetch_related('filament_snapshots').order_by("timestamp")
+        )
+        if end_dt:
+            metrics = metrics.filter(timestamp__lte=end_dt)
+        metrics = metrics.prefetch_related('filament_snapshots').order_by("timestamp")
 
         latest_metric = metrics.last()
 
@@ -46,6 +66,9 @@ class PrinterDashboardView(LoginRequiredMixin, TemplateView):
             "timestamps": [
                 m.timestamp.astimezone(tz).strftime("%H:%M") for m in metrics
             ],
+            "dates": [
+                m.timestamp.astimezone(tz).strftime("%Y-%m-%d") for m in metrics
+            ],
             "nozzle_temp": [
                 float(m.nozzle_temp) if m.nozzle_temp else None for m in metrics
             ],
@@ -237,109 +260,125 @@ class PrinterDataAPIView(LoginRequiredMixin, View):
             if not printer_device:
                 return JsonResponse({"error": "No printer device found"}, status=404)
 
-            query = PrinterMetrics.objects.filter(device=printer_device).prefetch_related('filament_snapshots')
-
             tz = zoneinfo.ZoneInfo(app_settings.TIMEZONE)
 
-            if start_date and start_time:
+            # Stage A: only() + step calculation
-                from datetime import datetime
+            query = (
-                start_dt_naive = datetime.strptime(f"{start_date} {start_time}", "%Y-%m-%d %H:%M")
+                PrinterMetrics.objects
-                start_dt = start_dt_naive.replace(tzinfo=tz)
+                .filter(device=printer_device)
+                .only(*_METRICS_API_FIELDS)
+            )
+
+            if start_date and start_time and end_date and end_time:
+                start_dt = datetime.strptime(f"{start_date} {start_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
+                end_dt = datetime.strptime(f"{end_date} {end_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
+                query = query.filter(timestamp__gte=start_dt, timestamp__lte=end_dt)
+                range_seconds = (end_dt - start_dt).total_seconds()
+                expected_count = max(1, int(range_seconds / 30))
+            elif start_date and start_time:
+                start_dt = datetime.strptime(f"{start_date} {start_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
                 query = query.filter(timestamp__gte=start_dt)
-
+                expected_count = _MAX_CHART_POINTS
-            if end_date and end_time:
+            elif end_date and end_time:
-                from datetime import datetime
+                end_dt = datetime.strptime(f"{end_date} {end_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
-                end_dt_naive = datetime.strptime(f"{end_date} {end_time}", "%Y-%m-%d %H:%M")
-                end_dt = end_dt_naive.replace(tzinfo=tz)
                 query = query.filter(timestamp__lte=end_dt)
+                expected_count = _MAX_CHART_POINTS
+            else:
+                expected_count = _MAX_CHART_POINTS
 
-            metrics = query.order_by("timestamp")
+            step = max(1, expected_count // _MAX_CHART_POINTS)
 
-            data = {
+            # Stage B: single DB round-trip, downsample in Python
-                "timestamps": [m.timestamp.astimezone(tz).strftime('%H:%M') for m in metrics],
+            metrics_list = list(query.order_by("timestamp"))
-                "timestamps_iso": [m.timestamp.astimezone(tz).isoformat() for m in metrics],
+            if step > 1:
-                "nozzle_temp": [float(m.nozzle_temp) if m.nozzle_temp else None for m in metrics],
+                metrics_list = metrics_list[::step]
-                "nozzle_target_temp": [float(m.nozzle_target_temp) if m.nozzle_target_temp else None for m in metrics],
-                "bed_temp": [float(m.bed_temp) if m.bed_temp else None for m in metrics],
-                "bed_target_temp": [float(m.bed_target_temp) if m.bed_target_temp else None for m in metrics],
-                "print_percent": [m.print_percent if m.print_percent else 0 for m in metrics],
-                "cooling_fan_speed": [m.cooling_fan_speed if m.cooling_fan_speed else 0 for m in metrics],
-                "heatbreak_fan_speed": [m.heatbreak_fan_speed if m.heatbreak_fan_speed else 0 for m in metrics],
-                "wifi_signal_dbm": [m.wifi_signal_dbm if m.wifi_signal_dbm else None for m in metrics],
-                "ams_humidity_raw": [m.ams_humidity_raw if m.ams_humidity_raw else None for m in metrics],
-                "ams_temp": [float(m.ams_temp) if m.ams_temp else None for m in metrics],
-                "layer_num": [m.layer_num if m.layer_num else 0 for m in metrics],
-                "total_layer_num": [m.total_layer_num if m.total_layer_num else 0 for m in metrics],
-                "gcode_state": [m.gcode_state for m in metrics],
-                "print_type": [m.print_type for m in metrics],
-                "subtask_name": [m.subtask_name for m in metrics],
-            }
 
-            project_markers = self._calculate_project_markers(metrics, tz)
+            total_points = len(metrics_list)
-            data["project_markers"] = project_markers
 
-            filament_timeline = self._prepare_filament_timeline_for_api(metrics)
+            # Stage C: targeted snapshot fetch (only sampled IDs)
-            data["filament_timeline"] = filament_timeline
+            snapshots_by_metric: dict = {}
+            if metrics_list:
+                sampled_ids = [m.id for m in metrics_list]
+                for snap in FilamentSnapshot.objects.filter(printer_metric_id__in=sampled_ids):
+                    snapshots_by_metric.setdefault(snap.printer_metric_id, []).append(snap)
 
-            return JsonResponse(data)
+            # Stage D: single-pass serialization
+            timestamps = []
+            timestamps_iso = []
+            dates = []
+            nozzle_temp = []
+            nozzle_target_temp = []
+            bed_temp = []
+            bed_target_temp = []
+            print_percent = []
+            cooling_fan_speed = []
+            heatbreak_fan_speed = []
+            wifi_signal_dbm = []
+            ams_humidity_raw = []
+            ams_temp = []
+            layer_num = []
+            total_layer_num = []
+            gcode_state = []
+            print_type = []
+            subtask_name = []
 
-        except Exception as e:
+            project_markers = []
-            import traceback
-            traceback.print_exc()
-            return JsonResponse({"error": str(e)}, status=500)
-
-    def _calculate_project_markers(self, metrics, timezone_info):
-        markers = []
             current_job = None
             last_state = None
 
-        for idx, metric in enumerate(metrics):
+            filament_data = {}
-            subtask = metric.subtask_name
-            gcode_state = metric.gcode_state
 
-            is_printing = gcode_state not in ['FINISH', 'IDLE', None, '']
+            for idx, m in enumerate(metrics_list):
+                ts = m.timestamp.astimezone(tz)
+                timestamps.append(ts.strftime('%H:%M'))
+                timestamps_iso.append(ts.isoformat())
+                dates.append(ts.strftime('%Y-%m-%d'))
+                nozzle_temp.append(float(m.nozzle_temp) if m.nozzle_temp else None)
+                nozzle_target_temp.append(float(m.nozzle_target_temp) if m.nozzle_target_temp else None)
+                bed_temp.append(float(m.bed_temp) if m.bed_temp else None)
+                bed_target_temp.append(float(m.bed_target_temp) if m.bed_target_temp else None)
+                print_percent.append(m.print_percent if m.print_percent else 0)
+                cooling_fan_speed.append(m.cooling_fan_speed if m.cooling_fan_speed else 0)
+                heatbreak_fan_speed.append(m.heatbreak_fan_speed if m.heatbreak_fan_speed else 0)
+                wifi_signal_dbm.append(m.wifi_signal_dbm if m.wifi_signal_dbm else None)
+                ams_humidity_raw.append(m.ams_humidity_raw if m.ams_humidity_raw else None)
+                ams_temp.append(float(m.ams_temp) if m.ams_temp else None)
+                layer_num.append(m.layer_num if m.layer_num else 0)
+                total_layer_num.append(m.total_layer_num if m.total_layer_num else 0)
+                gcode_state.append(m.gcode_state)
+                print_type.append(m.print_type)
+                subtask_name.append(m.subtask_name)
 
+                # Project marker detection (inline)
+                subtask = m.subtask_name
+                gs = m.gcode_state
+                is_printing = gs not in ['FINISH', 'IDLE', None, '']
                 if subtask and subtask != current_job and is_printing:
-                markers.append({
+                    project_markers.append({
                         'type': 'start',
                         'index': idx,
-                    'timestamp': metric.timestamp.astimezone(timezone_info).isoformat(),
+                        'timestamp': ts.isoformat(),
                         'project_name': subtask,
                     })
                     current_job = subtask
-                last_state = gcode_state
+                    last_state = gs
-
+                elif current_job and last_state and last_state not in ['FINISH', 'IDLE'] and gs in ['FINISH', 'IDLE']:
-            elif current_job and last_state and last_state not in ['FINISH', 'IDLE'] and gcode_state in ['FINISH', 'IDLE']:
+                    project_markers.append({
-                markers.append({
                         'type': 'end',
                         'index': idx,
-                    'timestamp': metric.timestamp.astimezone(timezone_info).isoformat(),
+                        'timestamp': ts.isoformat(),
                         'project_name': current_job,
                     })
                     current_job = None
+                last_state = gs
 
-            last_state = gcode_state
+                # Filament timeline (inline)
-
+                for snap in snapshots_by_metric.get(m.id, []):
-        return markers
+                    tray_id = snap.tray_id
-
+                    fil_type = snap.type or 'Unknown'
-    def _prepare_filament_timeline_for_api(self, metrics):
+                    fil_sub_type = snap.sub_type or 'Unknown'
-        filament_data = {}
+                    fil_color = snap.color or 'FFFFFFFF'
-        total_points = len(metrics)
-
-        for idx, metric in enumerate(metrics):
-            try:
-                snapshots = metric.filament_snapshots.all()
-            except Exception:
-                snapshots = []
-
-            for snapshot in snapshots:
-                tray_id = snapshot.tray_id
-                fil_type = snapshot.type or 'Unknown'
-                fil_sub_type = snapshot.sub_type or 'Unknown'
-                fil_color = snapshot.color or 'FFFFFFFF'
-
                     unique_key = f"{tray_id}_{fil_type}_{fil_sub_type}_{fil_color}"
-
                     if unique_key not in filament_data:
                         filament_data[unique_key] = {
                             'tray_id': tray_id,
@@ -349,17 +388,13 @@ class PrinterDataAPIView(LoginRequiredMixin, View):
                             'remain_data': [None] * total_points,
                             'start_idx': idx,
                         }
+                    filament_data[unique_key]['remain_data'][idx] = snap.remain_percent or 0
 
-                remain_percent = snapshot.remain_percent or 0
+                external = m.external_spool or {}
-                filament_data[unique_key]['remain_data'][idx] = remain_percent
-
-        for idx, metric in enumerate(metrics):
-            external = metric.external_spool or {}
                 if external.get('type'):
                     fil_type = external.get('type', 'Unknown')
                     fil_color = external.get('color', '161616FF')
                     unique_key = f"External_{fil_type}_{fil_color}"
-
                     if unique_key not in filament_data:
                         filament_data[unique_key] = {
                             'tray_id': 'External',
@@ -369,11 +404,37 @@ class PrinterDataAPIView(LoginRequiredMixin, View):
                             'remain_data': [None] * total_points,
                             'start_idx': idx,
                         }
+                    filament_data[unique_key]['remain_data'][idx] = external.get('remain', 0)
 
-                remain_percent = external.get('remain', 0)
+            data = {
-                filament_data[unique_key]['remain_data'][idx] = remain_percent
+                "timestamps": timestamps,
+                "timestamps_iso": timestamps_iso,
+                "dates": dates,
+                "nozzle_temp": nozzle_temp,
+                "nozzle_target_temp": nozzle_target_temp,
+                "bed_temp": bed_temp,
+                "bed_target_temp": bed_target_temp,
+                "print_percent": print_percent,
+                "cooling_fan_speed": cooling_fan_speed,
+                "heatbreak_fan_speed": heatbreak_fan_speed,
+                "wifi_signal_dbm": wifi_signal_dbm,
+                "ams_humidity_raw": ams_humidity_raw,
+                "ams_temp": ams_temp,
+                "layer_num": layer_num,
+                "total_layer_num": total_layer_num,
+                "gcode_state": gcode_state,
+                "print_type": print_type,
+                "subtask_name": subtask_name,
+                "project_markers": project_markers,
+                "filament_timeline": filament_data,
+            }
 
-        return filament_data
+            return JsonResponse(data)
+
+        except Exception as e:
+            import traceback
+            traceback.print_exc()
+            return JsonResponse({"error": str(e)}, status=500)
 
 
 class FilamentUsageDataAPIView(LoginRequiredMixin, View):
@@ -402,15 +463,32 @@ class FilamentUsageDataAPIView(LoginRequiredMixin, View):
                 end_dt = end_dt_naive.replace(tzinfo=tz)
                 query = query.filter(printer_metric__timestamp__lte=end_dt)
 
+            fallback_used = False
             if not start_date and not end_date:
                 time_24h_ago = timezone.now() - timedelta(hours=24)
-                query = query.filter(printer_metric__timestamp__gte=time_24h_ago)
+                default_query = query.filter(printer_metric__timestamp__gte=time_24h_ago)
-
+                if default_query.exists():
+                    snapshots = default_query.order_by('printer_metric__timestamp')
+                else:
+                    # Fallback: show 24h window ending at the most recent available snapshot
+                    last_snapshot = query.order_by('-printer_metric__timestamp').first()
+                    if last_snapshot:
+                        last_ts = last_snapshot.printer_metric.timestamp
+                        fallback_start = last_ts - timedelta(hours=24)
+                        snapshots = query.filter(
+                            printer_metric__timestamp__gte=fallback_start,
+                            printer_metric__timestamp__lte=last_ts
+                        ).order_by('printer_metric__timestamp')
+                        fallback_used = True
+                    else:
+                        snapshots = query.none()
+            else:
                 snapshots = query.order_by('printer_metric__timestamp')
 
             data = {
                 "timestamps": [s.printer_metric.timestamp.astimezone(tz).strftime('%Y-%m-%d %H:%M') for s in snapshots],
-                "remaining": [s.remain_percent for s in snapshots]
+                "remaining": [s.remain_percent for s in snapshots],
+                "fallback_used": fallback_used,
             }
 
             return JsonResponse(data)

docs/Bambu_Color_Catalog/ABS.txt

@@ -0,0 +1,28 @@
+White
+Hex:#FFFFFF
+Bambu Green
+Hex:#00AE42
+Olive
+Hex:#789D4A
+Azure
+Hex:#489FDF
+Navy Blue
+Hex:#0C2340
+Blue
+Hex:#0A2CA5
+Tangerine Yellow
+Hex:#FFC72C
+Orange
+Hex:#FF6A13
+Red
+Hex:#D32941
+Purple
+Hex:#AF1685
+Silver
+Hex:#87909A
+Black
+Hex:#000000
+Mint
+Hex:#7AE1BF
+Lavender
+Hex:#7248BD

docs/Bambu_Color_Catalog/ASA.txt

@@ -0,0 +1,6 @@
+White	#FFFAF2
+Gray	#8A949E
+Red	#E02928
+Green	#00A6A0
+Blue	#2140B4
+Black	#000000

docs/Bambu_Color_Catalog/PA6-GF.txt

@@ -0,0 +1,8 @@
+White	#EAEAE4
+Yellow	#FFCE00
+Lime	#C5ED48
+Blue	#75AED8
+Orange	#FF4800
+Brown	#5B492F
+Gray	#353533
+Black	#000000

docs/Bambu_Color_Catalog/PC FR.txt

@@ -0,0 +1,3 @@
+White	#FFFFFF
+Gray	#A8A8AA
+Black	#000000

docs/Bambu_Color_Catalog/PETG HF.txt

@@ -0,0 +1,14 @@
+Yellow	#FFD00B
+Orange	#F75403
+Green	#00AE42
+Red	#EB3A3A
+Blue	#002E96
+Black	#000000
+White	#FFFFFF
+Cream	#F9DFB9
+Lime Green	#6EE53C
+Forest Green	#39541A
+Lake Blue	#1F79E5
+Peanut Brown	#875718
+Gray	#ADB1B2
+Dark Gray	#515151

docs/Bambu_Color_Catalog/PETG Translucent.txt

@@ -0,0 +1,8 @@
+Translucent Gray	#8E8E8E
+Translucent Light Blue	#61B0FF
+Translucent Olive	#748C45
+Translucent Brown	#C9A381
+Translucent Teal	#77EDD7
+Translucent Orange	#FF911A
+Translucent Purple	#D6ABFF
+Translucent Pink	#F9C1BD

docs/Bambu_Color_Catalog/PLA Basic.txt

@@ -0,0 +1,60 @@
+Jade White
+Hex:#FFFFFF
+Magenta
+Hex:#EC008C
+Gold
+Hex:#E4BD68
+Mistletoe Green
+Hex:#3F8E43
+Red
+Hex:#C12E1F
+Purple
+Hex:#5E43B7
+Beige
+Hex:#F7E6DE
+Pink
+Hex:#F55A74
+Sunflower Yellow
+Hex:#FEC600
+Bronze
+Hex:#847D48
+Turquoise
+Hex:#00B1B7
+Indigo Purple
+Hex:#482960
+Light Gray
+Hex:#D1D3D5
+Hot Pink
+Hex:#F5547C
+Yellow
+Hex:#F4EE2A
+Cocoa Brown
+Hex:#6F5034
+Cyan
+Hex:#0086D6
+Blue Grey
+Hex:#5B6579
+Silver
+Hex:#A6A9AA
+Orange
+Hex:#FF6A13
+Bright Green
+Hex:#BECF00
+Brown
+Hex:#9D432C
+Blue
+Hex:#0A2989
+Dark Gray
+Hex:#545454
+Gray
+Hex:#8E9089
+Pumpkin Orange
+Hex:#FF9016
+Bambu Green
+Hex:#00AE42
+Maroon Red
+Hex:#9D2235
+Cobalt Blue
+Hex:#0056B8
+Black
+Hex:#000000

docs/Bambu_Color_Catalog/PLA Matte.txt

@@ -0,0 +1,50 @@
+Ivory White
+Hex:#FFFFFF
+Bone White
+Hex:#CBC6B8
+Desert Tan
+Hex:#E8DBB7
+Latte Brown
+Hex:#D3B7A7
+Caramel
+Hex:#AE835B
+Terracotta
+Hex:#B15533
+Dark Brown
+Hex:#7D6556
+Dark Chocolate
+Hex:#4D3324
+Lilac Purple
+Hex:#AE96D4
+Sakura Pink
+Hex:#E8AFCF
+Mandarin Orange
+Hex:#F99963
+Lemon Yellow
+Hex:#F7D959
+Plum
+Hex:#950051
+Scarlet Red
+Hex:#DE4343
+Dark Red
+Hex:#BB3D43
+Dark Green
+Hex:#68724D
+Grass Green
+Hex:#61C680
+Apple Green
+Hex:#C2E189
+Ice Blue
+Hex:#A3D8E1
+Sky Blue
+Hex:#56B7E6
+Marine Blue
+Hex:#0078BF
+Dark Blue
+Hex:#042F56
+Ash Gray
+Hex:#9B9EA0
+Nardo Gray
+Hex:#757575
+Charcoal
+Hex:#000000

docs/Bambu_Color_Catalog/PLA Wood.txt

@@ -0,0 +1,6 @@
+Black Walnut	#4F3F24
+Rosewood	#4C241C
+Clay Brown	#995F11
+Classic Birch	#918669
+White Oak	#D6CCA3
+Ochre Yellow	#C98935

native/bambu-run-collector.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Bambu-Run MQTT Collector
+After=network.target
+
+[Service]
+Type=exec
+WorkingDirectory={{REPO_DIR}}
+EnvironmentFile={{REPO_DIR}}/.env
+Environment=DJANGO_SETTINGS_MODULE=standalone.settings
+ExecStart={{VENV_DIR}}/bin/python standalone/manage.py bambu_collector
+Restart=on-failure
+RestartSec=10
+
+[Install]
+WantedBy=default.target

native/bambu-run-web.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Bambu-Run Web Dashboard
+After=network.target
+
+[Service]
+Type=exec
+WorkingDirectory={{REPO_DIR}}
+EnvironmentFile={{REPO_DIR}}/.env
+Environment=DJANGO_SETTINGS_MODULE=standalone.settings
+ExecStart={{VENV_DIR}}/bin/gunicorn standalone.wsgi:application --bind 0.0.0.0:8000 --workers {{WORKERS}} --timeout 120
+Restart=on-failure
+RestartSec=5
+
+[Install]
+WantedBy=default.target

native/bambu-run.sh

@@ -0,0 +1,58 @@
+#!/usr/bin/env bash
+# Bambu-Run convenience wrapper
+# Usage: ./native/bambu-run.sh {start|stop|restart|status|logs|update}
+set -euo pipefail
+
+REPO_DIR="$(cd "$(dirname "$0")/.." && pwd)"
+VENV_DIR="$REPO_DIR/.venv"
+MANAGE="$VENV_DIR/bin/python $REPO_DIR/standalone/manage.py"
+SERVICES="bambu-run-web.service bambu-run-collector.service"
+
+case "${1:-help}" in
+    start)
+        systemctl --user start $SERVICES
+        echo "Bambu-Run started."
+        ;;
+    stop)
+        systemctl --user stop $SERVICES
+        echo "Bambu-Run stopped."
+        ;;
+    restart)
+        systemctl --user restart $SERVICES
+        echo "Bambu-Run restarted."
+        ;;
+    status)
+        systemctl --user status $SERVICES --no-pager
+        ;;
+    logs)
+        journalctl --user -u bambu-run-web -u bambu-run-collector -f --no-hostname
+        ;;
+    update)
+        echo "Pulling latest code..."
+        cd "$REPO_DIR" && git pull
+
+        echo "Installing dependencies..."
+        "$VENV_DIR/bin/pip" install --quiet ".[standalone]"
+
+        echo "Running migrations..."
+        $MANAGE migrate --noinput
+
+        echo "Collecting static files..."
+        $MANAGE collectstatic --noinput --clear 2>/dev/null
+
+        echo "Restarting services..."
+        systemctl --user restart $SERVICES
+
+        echo "Update complete."
+        ;;
+    help|*)
+        echo "Usage: $0 {start|stop|restart|status|logs|update}"
+        echo
+        echo "  start    Start web + collector services"
+        echo "  stop     Stop web + collector services"
+        echo "  restart  Restart web + collector services"
+        echo "  status   Show service status"
+        echo "  logs     Tail live logs (Ctrl+C to stop)"
+        echo "  update   Pull latest code, install deps, migrate, restart"
+        ;;
+esac

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "bambu-run"
-version = "0.1.0"
+version = "0.1.1"
 description = "Django reusable app for Bambu Lab 3D printer monitoring and filament inventory management"
 readme = "README.md"
 license = {text = "MIT"}

setup.sh

@@ -0,0 +1,263 @@
+#!/usr/bin/env bash
+# Bambu-Run Native Setup — single entry point for Raspberry Pi (or any Linux)
+# Usage: git clone ... && cd Bambu-Run && bash setup.sh
+set -euo pipefail
+
+REPO_DIR="$(cd "$(dirname "$0")" && pwd)"
+VENV_DIR="$REPO_DIR/.venv"
+ENV_FILE="$REPO_DIR/.env"
+MANAGE="$VENV_DIR/bin/python $REPO_DIR/standalone/manage.py"
+SERVICE_DIR="$HOME/.config/systemd/user"
+
+green()  { printf '\033[1;32m%s\033[0m\n' "$*"; }
+yellow() { printf '\033[1;33m%s\033[0m\n' "$*"; }
+red()    { printf '\033[1;31m%s\033[0m\n' "$*"; }
+
+# ── 1. Pre-flight checks ─────────────────────────────────────────────────────
+
+green "=== Bambu-Run Native Setup ==="
+echo
+
+# Acquire sudo upfront and keep it alive for the duration of the script
+echo "This script needs sudo for iptables (port redirect) and apt (dependencies)."
+sudo -v
+while true; do sudo -n true; sleep 50; kill -0 "$$" || exit; done 2>/dev/null &
+SUDO_KEEPALIVE_PID=$!
+trap 'kill "$SUDO_KEEPALIVE_PID" 2>/dev/null' EXIT
+echo
+
+# Python >= 3.10
+PYTHON=""
+for cmd in python3.12 python3.11 python3.10 python3; do
+    if command -v "$cmd" &>/dev/null; then
+        ver=$("$cmd" -c 'import sys; print(f"{sys.version_info.major}.{sys.version_info.minor}")')
+        major=${ver%%.*}
+        minor=${ver##*.}
+        if [ "$major" -ge 3 ] && [ "$minor" -ge 10 ]; then
+            PYTHON="$cmd"
+            break
+        fi
+    fi
+done
+
+if [ -z "$PYTHON" ]; then
+    red "Error: Python >= 3.10 is required."
+    echo "Install it with: sudo apt install python3"
+    exit 1
+fi
+green "Found $PYTHON ($ver)"
+
+# Ensure python3-venv is available
+if ! "$PYTHON" -m venv --help &>/dev/null; then
+    yellow "Installing python3-venv..."
+    sudo apt-get update -qq && sudo apt-get install -y -qq python3-venv
+fi
+
+# Detect RAM for gunicorn worker count
+TOTAL_RAM_KB=$(grep MemTotal /proc/meminfo 2>/dev/null | awk '{print $2}' || echo 0)
+if [ "$TOTAL_RAM_KB" -lt 1048576 ]; then
+    WORKERS=1
+else
+    WORKERS=2
+fi
+
+# Prompt for access port
+while true; do
+    read -rp "Choose Bambu-Run Dashboard access port (Default: 80): " ACCESS_PORT
+    ACCESS_PORT="${ACCESS_PORT:-80}"
+    if [[ "$ACCESS_PORT" =~ ^[0-9]+$ ]] && [ "$ACCESS_PORT" -ge 1 ] && [ "$ACCESS_PORT" -le 65535 ]; then
+        break
+    else
+        red "Invalid port '$ACCESS_PORT'. Please enter a number between 1 and 65535."
+    fi
+done
+green "Dashboard will be accessible on port $ACCESS_PORT."
+
+# ── 2. Venv + install ────────────────────────────────────────────────────────
+
+if [ ! -d "$VENV_DIR" ]; then
+    green "Creating virtual environment..."
+    "$PYTHON" -m venv "$VENV_DIR"
+else
+    yellow "Virtual environment already exists, reusing."
+fi
+
+green "Installing dependencies..."
+
+# Stub opencv-python (same trick as Dockerfile — avoids hour-long ARM build)
+"$VENV_DIR/bin/python" -c "
+import site, pathlib
+d = pathlib.Path(site.getsitepackages()[0]) / 'opencv_python-4.99.0.dist-info'
+if not d.exists():
+    d.mkdir()
+    (d / 'METADATA').write_text('Metadata-Version: 2.1\nName: opencv-python\nVersion: 4.99.0\n')
+    (d / 'INSTALLER').write_text('pip\n')
+    (d / 'RECORD').write_text('')
+    print('  opencv stub created')
+else:
+    print('  opencv stub already exists')
+"
+
+"$VENV_DIR/bin/pip" install --quiet --upgrade pip
+"$VENV_DIR/bin/pip" install --quiet ".[standalone]"
+
+# ── 3. Interactive .env ───────────────────────────────────────────────────────
+
+if [ ! -f "$ENV_FILE" ]; then
+    green "Setting up .env configuration..."
+    echo
+
+    read -rp "Bambu Lab email: " BAMBU_USERNAME
+    read -rsp "Bambu Lab password: " BAMBU_PASSWORD
+    echo
+    while true; do
+        read -rp "Timezone [UTC] (e.g. America/Sydney): " TIMEZONE
+        TIMEZONE="${TIMEZONE:-UTC}"
+        if "$VENV_DIR/bin/python" -c "import zoneinfo; zoneinfo.ZoneInfo('$TIMEZONE')" 2>/dev/null; then
+            break
+        else
+            red "Unknown timezone '$TIMEZONE'. Find yours at: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones"
+        fi
+    done
+
+    # Generate a random Django secret key
+    DJANGO_SECRET_KEY=$("$VENV_DIR/bin/python" -c "import secrets; print(secrets.token_urlsafe(50))")
+
+    cat > "$ENV_FILE" <<EOF
+BAMBU_USERNAME=$BAMBU_USERNAME
+BAMBU_PASSWORD=$BAMBU_PASSWORD
+TIMEZONE=$TIMEZONE
+DJANGO_SECRET_KEY=$DJANGO_SECRET_KEY
+DEBUG=False
+EOF
+    green ".env created."
+else
+    yellow ".env already exists, skipping."
+fi
+
+# ── 4. Migrate ────────────────────────────────────────────────────────────────
+
+green "Running database migrations..."
+$MANAGE migrate --noinput
+
+# ── 5. Bambu authentication ──────────────────────────────────────────────────
+
+if ! grep -q '^BAMBU_TOKEN=' "$ENV_FILE" 2>/dev/null; then
+    green "Authenticating with Bambu Lab (email verification required)..."
+    echo "A verification code will be sent to your email."
+    echo
+
+    # Run collector in --once mode for interactive auth
+    $MANAGE bambu_collector --once || true
+
+    echo
+    read -rp "Paste your BAMBU_TOKEN from above (or press Enter to skip): " TOKEN
+    if [ -n "$TOKEN" ]; then
+        echo "BAMBU_TOKEN=$TOKEN" >> "$ENV_FILE"
+        green "Token saved to .env."
+    else
+        yellow "Skipped — you can add BAMBU_TOKEN to .env later."
+    fi
+else
+    yellow "BAMBU_TOKEN already in .env, skipping auth."
+fi
+
+# ── 6. Superuser ─────────────────────────────────────────────────────────────
+
+echo
+if $MANAGE shell -c "from django.contrib.auth import get_user_model; exit(0 if get_user_model().objects.filter(is_superuser=True).exists() else 1)" 2>/dev/null; then
+    yellow "Superuser already exists, skipping. (To add another, run: python standalone/manage.py createsuperuser)"
+else
+    green "Create your dashboard login (Django superuser):"
+    $MANAGE createsuperuser || yellow "Superuser creation skipped."
+fi
+
+# ── 7. Collect static files ──────────────────────────────────────────────────
+
+green "Collecting static files..."
+$MANAGE collectstatic --noinput --clear 2>/dev/null
+
+# ── 8. Seed filament colors ──────────────────────────────────────────────────
+
+echo
+read -rp "Import Bambu Lab filament color catalog? [Y/n] " SEED_COLORS
+SEED_COLORS="${SEED_COLORS:-Y}"
+if [[ "$SEED_COLORS" =~ ^[Yy] ]]; then
+    $MANAGE bambu_import_colors "$REPO_DIR/docs/Bambu_Color_Catalog/"
+fi
+
+# ── 9. Install systemd services ──────────────────────────────────────────────
+
+green "Installing systemd user services..."
+mkdir -p "$SERVICE_DIR"
+
+# Generate unit files with actual paths substituted
+sed "s|{{REPO_DIR}}|$REPO_DIR|g; s|{{VENV_DIR}}|$VENV_DIR|g; s|{{WORKERS}}|$WORKERS|g" \
+    "$REPO_DIR/native/bambu-run-web.service" > "$SERVICE_DIR/bambu-run-web.service"
+
+sed "s|{{REPO_DIR}}|$REPO_DIR|g; s|{{VENV_DIR}}|$VENV_DIR|g" \
+    "$REPO_DIR/native/bambu-run-collector.service" > "$SERVICE_DIR/bambu-run-collector.service"
+
+systemctl --user daemon-reload
+systemctl --user enable bambu-run-web.service bambu-run-collector.service
+
+# Enable linger so services survive SSH logout
+loginctl enable-linger "$USER" 2>/dev/null || \
+    sudo loginctl enable-linger "$USER" 2>/dev/null || \
+    yellow "Warning: Could not enable linger. Services may stop when you disconnect SSH."
+
+systemctl --user start bambu-run-web.service bambu-run-collector.service
+
+# ── 10. Port redirect (ACCESS_PORT → 8000 via iptables if needed) ────────────
+
+PORT_OK=false
+if [ "$ACCESS_PORT" -eq 8000 ]; then
+    # Gunicorn already on 8000 — no redirect needed
+    green "Using port 8000 directly (no redirect needed)."
+    PORT_OK=true
+else
+    if sudo iptables -t nat -C PREROUTING -p tcp --dport "$ACCESS_PORT" -j REDIRECT --to-port 8000 2>/dev/null; then
+        yellow "Port $ACCESS_PORT → 8000 redirect already set."
+        PORT_OK=true
+    else
+        # Ensure iptables is available
+        if ! command -v iptables &>/dev/null; then
+            yellow "Installing iptables..."
+            DEBIAN_FRONTEND=noninteractive sudo apt-get install -y -qq iptables
+        fi
+        if sudo iptables -t nat -A PREROUTING -p tcp --dport "$ACCESS_PORT" -j REDIRECT --to-port 8000 && \
+           sudo iptables -t nat -A OUTPUT -o lo -p tcp --dport "$ACCESS_PORT" -j REDIRECT --to-port 8000; then
+            green "Port $ACCESS_PORT → 8000 redirect configured."
+            PORT_OK=true
+            # Persist so it survives reboot
+            if ! command -v netfilter-persistent &>/dev/null; then
+                yellow "Installing iptables-persistent to survive reboots..."
+                DEBIAN_FRONTEND=noninteractive sudo apt-get install -y -qq iptables-persistent
+            fi
+            sudo netfilter-persistent save 2>/dev/null || sudo sh -c 'iptables-save > /etc/iptables/rules.v4'
+        else
+            yellow "Warning: Could not set port $ACCESS_PORT redirect (sudo required). Access via http://<ip>:8000"
+        fi
+    fi
+fi
+
+# ── 11. Summary ───────────────────────────────────────────────────────────────
+
+PI_IP=$(hostname -I 2>/dev/null | awk '{print $1}')
+if [ "$PORT_OK" = true ] && [ "$ACCESS_PORT" -ne 8000 ]; then
+    DASHBOARD_URL="http://${PI_IP:-localhost}$([ "$ACCESS_PORT" -eq 80 ] && echo '' || echo ":$ACCESS_PORT")"
+else
+    DASHBOARD_URL="http://${PI_IP:-localhost}:8000"
+fi
+echo
+green "============================================"
+green "  Bambu-Run is running!"
+green "============================================"
+echo
+echo "  Dashboard:  $DASHBOARD_URL"
+echo "  Status:     systemctl --user status bambu-run-web bambu-run-collector"
+echo "  Logs:       journalctl --user -u bambu-run-web -u bambu-run-collector -f"
+echo "  Helper:     ./native/bambu-run.sh {start|stop|restart|status|logs|update}"
+echo
+echo "  Services auto-start on boot. Safe to close SSH."
+echo

standalone/manage.py

@@ -5,7 +5,15 @@ import sys
 
 # Ensure the project root (/app) is on sys.path so that both 'standalone'
 # and 'bambu_run' are importable regardless of where this script is invoked from.
-sys.path.insert(0, os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
+PROJECT_ROOT = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+sys.path.insert(0, PROJECT_ROOT)
+
+# Load .env so manage.py commands pick up env vars outside of systemd/Docker
+try:
+    from dotenv import load_dotenv
+    load_dotenv(os.path.join(PROJECT_ROOT, ".env"))
+except ImportError:
+    pass
 
 
 def main():