wipe out instructions updated

README.md

@@ -22,151 +22,144 @@ It runs quietly in the background 24/7, capturing every print, filament change,
 
 ## Table of Contents
 
-- [Quick Start: One-Click Docker Setup — Beginner Friendly](#quick-start-one-click-docker-setup--beginner-friendly)
+- [Native Setup (Recommended for Raspberry Pi)](#native-setup-recommended-for-raspberry-pi)
   - [What You'll Need](#what-youll-need)
-  - [Step 1: Connect to Your Raspberry Pi](#step-1-connect-to-your-raspberry-pi)
-  - [Step 2: Install Docker](#step-2-install-docker)
-  - [Step 3: Download and Configure](#step-3-download-and-configure)
-  - [Step 4: Build the Container](#step-4-build-the-container)
-  - [Step 5: First-Time Authentication](#step-5-first-time-authentication)
-  - [Step 6: Start Bambu-Run and Create Your Login](#step-6-start-bambu-run-and-create-your-login)
-  - [Step 7: Open the Dashboard](#step-7-open-the-dashboard)
-  - [Troubleshooting](#troubleshooting)
+  - [Clone and run setup.sh](#clone-and-run-setupsh)
+  - [Managing Bambu-Run](#managing-bambu-run)
+  - [Troubleshooting (Native)](#troubleshooting-native)
+- [Docker Setup](#docker-setup)
 - [Batch Importing Filament Colors and Filament Types](#batch-importing-filament-colors-and-filament-types)
 
 ---
 
-## Quick Start: One-Click Docker Setup — Beginner Friendly
+## Native Setup (Recommended for Raspberry Pi)
 
-Get Bambu-Run running on a **Raspberry Pi** in minutes. No prior server experience needed.
+No Docker required. Works on any Raspberry Pi (including 32-bit Pi Model B) running Raspberry Pi OS with Python 3.10+.
 
 ### What You'll Need
 
-- A Raspberry Pi (3B+, 4, or 5) running Raspberry Pi OS 64-bit, with a 32 GB+ MicroSD card, connected to your network
-- Your Bambu Lab printer on the **same local network**
-- Your Bambu Lab account **email and password**
-- A computer to SSH into the Pi
+- Raspberry Pi on your local network (Python 3.10+)
+- Bambu Lab printer
+- Bambu Lab account **email and password**
 
-### Step 1: Connect to Your Raspberry Pi
-
-From your computer, open a terminal (Mac/Linux) or PowerShell (Windows):
+### Clone and run setup.sh
 
 ```bash
-ssh pi@raspberrypi.local
+git clone https://github.com/RunLit/Bambu-Run.git
+cd Bambu-Run
+bash setup.sh
 ```
 
-> Can't connect? Use your Pi's IP address (find it in your router's admin page). Default password: `raspberry`
+That's it! The script handles everything interactively, just answer the prompts. When it finishes, open `http://<ip>` from any device on same network.
 
-### Step 2: Install Docker
+The script is safe to re-run at any time.
 
+---
+
+**What the script does**:
+
+- **Dependencies**: creates a Python virtual environment, installs all packages
+- **Credentials**: prompts for your **BambuLab Cloud account** email, password, and timezone; auto-generates a `DJANGO_SECRET_KEY`; writes `.env`
+- **Bambu Cloud auth**: runs `bambu_collector --once`; 
+  - Bambu Lab will send a 6-digit code to your email; check you email box and enter it when prompted; 
+  - the resulting token is saved to `.env` automatically; future restarts skip this step
+- **Dashboard login**: runs `createsuperuser`; choose a username and password for Bambu-Run web UI log in
+- **Services**: installs and starts two systemd services (`bambu-run-web` and `bambu-run-collector`), enables linger so they auto-start on boot
+- **Port 80**: sets an `iptables` redirect (80 to 8000) so you can reach the dashboard at a plain `http://<pi-ip>` with no port number; persisted via `iptables-persistent` across reboots. 
+
+---
+
+### Managing Bambu-Run
+
+All commands manage Bambu-Run encapsulated in `./native/bambu-run.sh`. Alternatively, you can do it yourself with systemctl commands.
 ```bash
-curl -fsSL https://get.docker.com | sudo sh
-sudo usermod -aG docker $USER
+./native/bambu-run.sh status    # service status
+./native/bambu-run.sh logs      # tail live logs (Ctrl+C to stop)
+./native/bambu-run.sh restart   # restart both services
+./native/bambu-run.sh stop      # stop everything
+./native/bambu-run.sh update    # git pull + pip install + migrate + restart
 ```
 
-Log out and back in for the change to take effect, then verify:
+### Troubleshooting (Native)
 
+**Services die when SSH disconnects:** `sudo loginctl enable-linger $USER`
+
+**Services not starting:** `./native/bambu-run.sh status` and `./native/bambu-run.sh logs`
+
+**Auth errors / token expired:** Remove `BAMBU_TOKEN` from `.env` and re-run `bash setup.sh`
+
+**Uninstall:**
 ```bash
-exit
+systemctl --user disable --now bambu-run-web bambu-run-collector
+rm ~/.config/systemd/user/bambu-run-{web,collector}.service
+systemctl --user daemon-reload
 ```
 
+**Wipe everything and start over:**
 ```bash
-ssh pi@raspberrypi.local
-docker --version   # should show Docker version 27.x.x
+# Stop and remove services
+systemctl --user stop bambu-run-web bambu-run-collector
+systemctl --user disable bambu-run-web bambu-run-collector
+rm ~/.config/systemd/user/bambu-run-{web,collector}.service
+systemctl --user daemon-reload
+
+# Remove port redirect (replace 80 with whatever port you chose during setup)
+sudo iptables -t nat -D PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8000 2>/dev/null || true
+sudo iptables -t nat -D OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8000 2>/dev/null || true
+sudo netfilter-persistent save 2>/dev/null || true
+
+# Delete repo — wipes venv, database, and .env
+cd ~
+rm -rf ~/Bambu-Run
+
+# Re-clone and run setup from scratch
+git clone https://github.com/RunLit/Bambu-Run.git
+cd Bambu-Run
+bash setup.sh
 ```
 
-> Installation issues? See: https://docs.docker.com/engine/install/raspberry-pi-os/
+---
 
-### Step 3: Download and Configure
+## Docker Setup
+
+Requires Docker and Docker Compose installed. Assumes you already know how to get there.
+
+**Clone and configure:**
 
 ```bash
 git clone https://github.com/RunLit/Bambu-Run.git
 cd Bambu-Run
 cp .env.example .env
-nano .env
+# Edit .env: set BAMBU_USERNAME, BAMBU_PASSWORD, TIMEZONE
 ```
 
-Fill in your Bambu Lab credentials:
-
-```
-BAMBU_USERNAME=your_email@example.com
-BAMBU_PASSWORD=your_password
-TIMEZONE=Australia/Melbourne   # optional — find yours at https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-```
-
-Save: `Ctrl + X`, `Y`, `Enter`
-
-### Step 4: Build the Container
+**First-time auth** (Bambu Lab sends a 6-digit verification code to your email):
 
 ```bash
 docker compose build
-```
-
-This takes a few minutes the first time — it downloads all required software.
-
-### Step 5: First-Time Authentication
-
-Bambu Lab requires email verification on first login. Run these two commands:
-
-```bash
 docker compose run --rm bambu-run python standalone/manage.py migrate --noinput
 docker compose run --rm bambu-run python standalone/manage.py bambu_collector --once
+# Paste the printed token into .env as BAMBU_TOKEN=...
 ```
 
-When prompted, enter the 6-digit code sent to your email. On success you'll see a token printed — copy it and add it to your `.env`:
-
-```bash
-nano .env
-```
-
-```
-BAMBU_TOKEN=eyJhbGciOiJIUzI1N...paste_full_token_here
-```
-
-> Saving the token lets future restarts skip re-verification automatically.
-
-### Step 6: Start Bambu-Run and Create Your Login
+**Start and create your dashboard login:**
 
 ```bash
 docker compose up -d
 docker compose exec bambu-run python standalone/manage.py createsuperuser
 ```
 
-Choose a username and password — this is your dashboard login.
+Dashboard is at `http://<host-ip>:8000`.
 
-### Step 7: Open the Dashboard
+**Common operations:**
 
-On any device on your network, open a browser and go to:
-
-```
-http://raspberrypi.local:8000
-```
-
-> If that doesn't work, use your Pi's IP: `http://<pi-ip-address>:8000`
-
-Log in with the account you just created. Your printer dashboard should be live.
-
-### Troubleshooting
-
-**No data / cannot connect to printer:** Make sure the printer is on and on the same network. Check logs: `docker compose logs -f`. If you see auth errors, re-run Step 5 to get a fresh token.
-
-**401 Unauthorized / verification loop:** Remove `BAMBU_TOKEN` from `.env` and re-run Step 5.
-
-**Docker daemon error:** Log out and back in after Step 2 — the group change requires a new session.
-
-**Dashboard not loading:** Run `docker compose ps` to confirm the service is `Up`, then try the Pi's IP address directly.
-
-**Update Bambu-Run:**
 ```bash
-cd ~/Bambu-Run && git pull && docker compose up -d --build
+docker compose logs -f                          # live logs
+docker compose down                             # stop (data preserved in volume)
+git pull && docker compose up -d --build        # update
 ```
 
-**Stop Bambu-Run:**
-```bash
-docker compose down
-```
-
-Your data is preserved in a Docker volume and will be there when you start it again.
+**Troubleshooting:** Auth errors → remove `BAMBU_TOKEN` from `.env` and re-run the auth step. No data → check `docker compose logs -f` for MQTT connection errors.
 
 ---
 

bambu_run/views.py

@@ -1,4 +1,4 @@
-from datetime import timedelta
+from datetime import timedelta, datetime
 from django.views.generic import TemplateView, View, ListView, CreateView, UpdateView, DetailView, DeleteView
 from django.contrib.auth.mixins import LoginRequiredMixin
 from django.utils import timezone
@@ -13,6 +13,18 @@ from .conf import app_settings
 from .models import Printer, PrinterMetrics, Filament, FilamentColor, FilamentType, FilamentSnapshot, PrintJob, FilamentUsage
 from .forms import FilamentForm, FilamentColorForm, FilamentTypeForm
 
+_METRICS_API_FIELDS = [
+    'id', 'device_id', 'timestamp',
+    'nozzle_temp', 'nozzle_target_temp',
+    'bed_temp', 'bed_target_temp',
+    'print_percent', 'cooling_fan_speed', 'heatbreak_fan_speed',
+    'wifi_signal_dbm', 'ams_humidity_raw', 'ams_temp',
+    'layer_num', 'total_layer_num',
+    'gcode_state', 'print_type', 'subtask_name',
+    'external_spool',
+]
+_MAX_CHART_POINTS = 3000
+
 
 class PrinterDashboardView(LoginRequiredMixin, TemplateView):
     template_name = "bambu_run/printer_dashboard.html"
@@ -248,110 +260,125 @@ class PrinterDataAPIView(LoginRequiredMixin, View):
             if not printer_device:
                 return JsonResponse({"error": "No printer device found"}, status=404)
 
-            query = PrinterMetrics.objects.filter(device=printer_device).prefetch_related('filament_snapshots')
-
             tz = zoneinfo.ZoneInfo(app_settings.TIMEZONE)
 
-            if start_date and start_time:
-                from datetime import datetime
-                start_dt_naive = datetime.strptime(f"{start_date} {start_time}", "%Y-%m-%d %H:%M")
-                start_dt = start_dt_naive.replace(tzinfo=tz)
+            # Stage A: only() + step calculation
+            query = (
+                PrinterMetrics.objects
+                .filter(device=printer_device)
+                .only(*_METRICS_API_FIELDS)
+            )
+
+            if start_date and start_time and end_date and end_time:
+                start_dt = datetime.strptime(f"{start_date} {start_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
+                end_dt = datetime.strptime(f"{end_date} {end_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
+                query = query.filter(timestamp__gte=start_dt, timestamp__lte=end_dt)
+                range_seconds = (end_dt - start_dt).total_seconds()
+                expected_count = max(1, int(range_seconds / 30))
+            elif start_date and start_time:
+                start_dt = datetime.strptime(f"{start_date} {start_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
                 query = query.filter(timestamp__gte=start_dt)
-
-            if end_date and end_time:
-                from datetime import datetime
-                end_dt_naive = datetime.strptime(f"{end_date} {end_time}", "%Y-%m-%d %H:%M")
-                end_dt = end_dt_naive.replace(tzinfo=tz)
+                expected_count = _MAX_CHART_POINTS
+            elif end_date and end_time:
+                end_dt = datetime.strptime(f"{end_date} {end_time}", "%Y-%m-%d %H:%M").replace(tzinfo=tz)
                 query = query.filter(timestamp__lte=end_dt)
+                expected_count = _MAX_CHART_POINTS
+            else:
+                expected_count = _MAX_CHART_POINTS
 
-            metrics = query.order_by("timestamp")
+            step = max(1, expected_count // _MAX_CHART_POINTS)
 
-            data = {
-                "timestamps": [m.timestamp.astimezone(tz).strftime('%H:%M') for m in metrics],
-                "timestamps_iso": [m.timestamp.astimezone(tz).isoformat() for m in metrics],
-                "dates": [m.timestamp.astimezone(tz).strftime('%Y-%m-%d') for m in metrics],
-                "nozzle_temp": [float(m.nozzle_temp) if m.nozzle_temp else None for m in metrics],
-                "nozzle_target_temp": [float(m.nozzle_target_temp) if m.nozzle_target_temp else None for m in metrics],
-                "bed_temp": [float(m.bed_temp) if m.bed_temp else None for m in metrics],
-                "bed_target_temp": [float(m.bed_target_temp) if m.bed_target_temp else None for m in metrics],
-                "print_percent": [m.print_percent if m.print_percent else 0 for m in metrics],
-                "cooling_fan_speed": [m.cooling_fan_speed if m.cooling_fan_speed else 0 for m in metrics],
-                "heatbreak_fan_speed": [m.heatbreak_fan_speed if m.heatbreak_fan_speed else 0 for m in metrics],
-                "wifi_signal_dbm": [m.wifi_signal_dbm if m.wifi_signal_dbm else None for m in metrics],
-                "ams_humidity_raw": [m.ams_humidity_raw if m.ams_humidity_raw else None for m in metrics],
-                "ams_temp": [float(m.ams_temp) if m.ams_temp else None for m in metrics],
-                "layer_num": [m.layer_num if m.layer_num else 0 for m in metrics],
-                "total_layer_num": [m.total_layer_num if m.total_layer_num else 0 for m in metrics],
-                "gcode_state": [m.gcode_state for m in metrics],
-                "print_type": [m.print_type for m in metrics],
-                "subtask_name": [m.subtask_name for m in metrics],
-            }
+            # Stage B: single DB round-trip, downsample in Python
+            metrics_list = list(query.order_by("timestamp"))
+            if step > 1:
+                metrics_list = metrics_list[::step]
 
-            project_markers = self._calculate_project_markers(metrics, tz)
-            data["project_markers"] = project_markers
+            total_points = len(metrics_list)
 
-            filament_timeline = self._prepare_filament_timeline_for_api(metrics)
-            data["filament_timeline"] = filament_timeline
+            # Stage C: targeted snapshot fetch (only sampled IDs)
+            snapshots_by_metric: dict = {}
+            if metrics_list:
+                sampled_ids = [m.id for m in metrics_list]
+                for snap in FilamentSnapshot.objects.filter(printer_metric_id__in=sampled_ids):
+                    snapshots_by_metric.setdefault(snap.printer_metric_id, []).append(snap)
 
-            return JsonResponse(data)
+            # Stage D: single-pass serialization
+            timestamps = []
+            timestamps_iso = []
+            dates = []
+            nozzle_temp = []
+            nozzle_target_temp = []
+            bed_temp = []
+            bed_target_temp = []
+            print_percent = []
+            cooling_fan_speed = []
+            heatbreak_fan_speed = []
+            wifi_signal_dbm = []
+            ams_humidity_raw = []
+            ams_temp = []
+            layer_num = []
+            total_layer_num = []
+            gcode_state = []
+            print_type = []
+            subtask_name = []
 
-        except Exception as e:
-            import traceback
-            traceback.print_exc()
-            return JsonResponse({"error": str(e)}, status=500)
-
-    def _calculate_project_markers(self, metrics, timezone_info):
-        markers = []
+            project_markers = []
             current_job = None
             last_state = None
 
-        for idx, metric in enumerate(metrics):
-            subtask = metric.subtask_name
-            gcode_state = metric.gcode_state
+            filament_data = {}
 
-            is_printing = gcode_state not in ['FINISH', 'IDLE', None, '']
+            for idx, m in enumerate(metrics_list):
+                ts = m.timestamp.astimezone(tz)
+                timestamps.append(ts.strftime('%H:%M'))
+                timestamps_iso.append(ts.isoformat())
+                dates.append(ts.strftime('%Y-%m-%d'))
+                nozzle_temp.append(float(m.nozzle_temp) if m.nozzle_temp else None)
+                nozzle_target_temp.append(float(m.nozzle_target_temp) if m.nozzle_target_temp else None)
+                bed_temp.append(float(m.bed_temp) if m.bed_temp else None)
+                bed_target_temp.append(float(m.bed_target_temp) if m.bed_target_temp else None)
+                print_percent.append(m.print_percent if m.print_percent else 0)
+                cooling_fan_speed.append(m.cooling_fan_speed if m.cooling_fan_speed else 0)
+                heatbreak_fan_speed.append(m.heatbreak_fan_speed if m.heatbreak_fan_speed else 0)
+                wifi_signal_dbm.append(m.wifi_signal_dbm if m.wifi_signal_dbm else None)
+                ams_humidity_raw.append(m.ams_humidity_raw if m.ams_humidity_raw else None)
+                ams_temp.append(float(m.ams_temp) if m.ams_temp else None)
+                layer_num.append(m.layer_num if m.layer_num else 0)
+                total_layer_num.append(m.total_layer_num if m.total_layer_num else 0)
+                gcode_state.append(m.gcode_state)
+                print_type.append(m.print_type)
+                subtask_name.append(m.subtask_name)
 
+                # Project marker detection (inline)
+                subtask = m.subtask_name
+                gs = m.gcode_state
+                is_printing = gs not in ['FINISH', 'IDLE', None, '']
                 if subtask and subtask != current_job and is_printing:
-                markers.append({
+                    project_markers.append({
                         'type': 'start',
                         'index': idx,
-                    'timestamp': metric.timestamp.astimezone(timezone_info).isoformat(),
+                        'timestamp': ts.isoformat(),
                         'project_name': subtask,
                     })
                     current_job = subtask
-                last_state = gcode_state
-
-            elif current_job and last_state and last_state not in ['FINISH', 'IDLE'] and gcode_state in ['FINISH', 'IDLE']:
-                markers.append({
+                    last_state = gs
+                elif current_job and last_state and last_state not in ['FINISH', 'IDLE'] and gs in ['FINISH', 'IDLE']:
+                    project_markers.append({
                         'type': 'end',
                         'index': idx,
-                    'timestamp': metric.timestamp.astimezone(timezone_info).isoformat(),
+                        'timestamp': ts.isoformat(),
                         'project_name': current_job,
                     })
                     current_job = None
+                last_state = gs
 
-            last_state = gcode_state
-
-        return markers
-
-    def _prepare_filament_timeline_for_api(self, metrics):
-        filament_data = {}
-        total_points = len(metrics)
-
-        for idx, metric in enumerate(metrics):
-            try:
-                snapshots = metric.filament_snapshots.all()
-            except Exception:
-                snapshots = []
-
-            for snapshot in snapshots:
-                tray_id = snapshot.tray_id
-                fil_type = snapshot.type or 'Unknown'
-                fil_sub_type = snapshot.sub_type or 'Unknown'
-                fil_color = snapshot.color or 'FFFFFFFF'
-
+                # Filament timeline (inline)
+                for snap in snapshots_by_metric.get(m.id, []):
+                    tray_id = snap.tray_id
+                    fil_type = snap.type or 'Unknown'
+                    fil_sub_type = snap.sub_type or 'Unknown'
+                    fil_color = snap.color or 'FFFFFFFF'
                     unique_key = f"{tray_id}_{fil_type}_{fil_sub_type}_{fil_color}"
-
                     if unique_key not in filament_data:
                         filament_data[unique_key] = {
                             'tray_id': tray_id,
@@ -361,17 +388,13 @@ class PrinterDataAPIView(LoginRequiredMixin, View):
                             'remain_data': [None] * total_points,
                             'start_idx': idx,
                         }
+                    filament_data[unique_key]['remain_data'][idx] = snap.remain_percent or 0
 
-                remain_percent = snapshot.remain_percent or 0
-                filament_data[unique_key]['remain_data'][idx] = remain_percent
-
-        for idx, metric in enumerate(metrics):
-            external = metric.external_spool or {}
+                external = m.external_spool or {}
                 if external.get('type'):
                     fil_type = external.get('type', 'Unknown')
                     fil_color = external.get('color', '161616FF')
                     unique_key = f"External_{fil_type}_{fil_color}"
-
                     if unique_key not in filament_data:
                         filament_data[unique_key] = {
                             'tray_id': 'External',
@@ -381,11 +404,37 @@ class PrinterDataAPIView(LoginRequiredMixin, View):
                             'remain_data': [None] * total_points,
                             'start_idx': idx,
                         }
+                    filament_data[unique_key]['remain_data'][idx] = external.get('remain', 0)
 
-                remain_percent = external.get('remain', 0)
-                filament_data[unique_key]['remain_data'][idx] = remain_percent
+            data = {
+                "timestamps": timestamps,
+                "timestamps_iso": timestamps_iso,
+                "dates": dates,
+                "nozzle_temp": nozzle_temp,
+                "nozzle_target_temp": nozzle_target_temp,
+                "bed_temp": bed_temp,
+                "bed_target_temp": bed_target_temp,
+                "print_percent": print_percent,
+                "cooling_fan_speed": cooling_fan_speed,
+                "heatbreak_fan_speed": heatbreak_fan_speed,
+                "wifi_signal_dbm": wifi_signal_dbm,
+                "ams_humidity_raw": ams_humidity_raw,
+                "ams_temp": ams_temp,
+                "layer_num": layer_num,
+                "total_layer_num": total_layer_num,
+                "gcode_state": gcode_state,
+                "print_type": print_type,
+                "subtask_name": subtask_name,
+                "project_markers": project_markers,
+                "filament_timeline": filament_data,
+            }
 
-        return filament_data
+            return JsonResponse(data)
+
+        except Exception as e:
+            import traceback
+            traceback.print_exc()
+            return JsonResponse({"error": str(e)}, status=500)
 
 
 class FilamentUsageDataAPIView(LoginRequiredMixin, View):

docs/Bambu_Color_Catalog/ABS.txt

@@ -22,3 +22,7 @@ Silver
 Hex:#87909A
 Black
 Hex:#000000
+Mint
+Hex:#7AE1BF
+Lavender
+Hex:#7248BD

native/bambu-run-collector.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Bambu-Run MQTT Collector
+After=network.target
+
+[Service]
+Type=exec
+WorkingDirectory={{REPO_DIR}}
+EnvironmentFile={{REPO_DIR}}/.env
+Environment=DJANGO_SETTINGS_MODULE=standalone.settings
+ExecStart={{VENV_DIR}}/bin/python standalone/manage.py bambu_collector
+Restart=on-failure
+RestartSec=10
+
+[Install]
+WantedBy=default.target

native/bambu-run-web.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Bambu-Run Web Dashboard
+After=network.target
+
+[Service]
+Type=exec
+WorkingDirectory={{REPO_DIR}}
+EnvironmentFile={{REPO_DIR}}/.env
+Environment=DJANGO_SETTINGS_MODULE=standalone.settings
+ExecStart={{VENV_DIR}}/bin/gunicorn standalone.wsgi:application --bind 0.0.0.0:8000 --workers {{WORKERS}} --timeout 120
+Restart=on-failure
+RestartSec=5
+
+[Install]
+WantedBy=default.target

native/bambu-run.sh

@@ -0,0 +1,58 @@
+#!/usr/bin/env bash
+# Bambu-Run convenience wrapper
+# Usage: ./native/bambu-run.sh {start|stop|restart|status|logs|update}
+set -euo pipefail
+
+REPO_DIR="$(cd "$(dirname "$0")/.." && pwd)"
+VENV_DIR="$REPO_DIR/.venv"
+MANAGE="$VENV_DIR/bin/python $REPO_DIR/standalone/manage.py"
+SERVICES="bambu-run-web.service bambu-run-collector.service"
+
+case "${1:-help}" in
+    start)
+        systemctl --user start $SERVICES
+        echo "Bambu-Run started."
+        ;;
+    stop)
+        systemctl --user stop $SERVICES
+        echo "Bambu-Run stopped."
+        ;;
+    restart)
+        systemctl --user restart $SERVICES
+        echo "Bambu-Run restarted."
+        ;;
+    status)
+        systemctl --user status $SERVICES --no-pager
+        ;;
+    logs)
+        journalctl --user -u bambu-run-web -u bambu-run-collector -f --no-hostname
+        ;;
+    update)
+        echo "Pulling latest code..."
+        cd "$REPO_DIR" && git pull
+
+        echo "Installing dependencies..."
+        "$VENV_DIR/bin/pip" install --quiet ".[standalone]"
+
+        echo "Running migrations..."
+        $MANAGE migrate --noinput
+
+        echo "Collecting static files..."
+        $MANAGE collectstatic --noinput --clear 2>/dev/null
+
+        echo "Restarting services..."
+        systemctl --user restart $SERVICES
+
+        echo "Update complete."
+        ;;
+    help|*)
+        echo "Usage: $0 {start|stop|restart|status|logs|update}"
+        echo
+        echo "  start    Start web + collector services"
+        echo "  stop     Stop web + collector services"
+        echo "  restart  Restart web + collector services"
+        echo "  status   Show service status"
+        echo "  logs     Tail live logs (Ctrl+C to stop)"
+        echo "  update   Pull latest code, install deps, migrate, restart"
+        ;;
+esac

setup.sh

@@ -0,0 +1,263 @@
+#!/usr/bin/env bash
+# Bambu-Run Native Setup — single entry point for Raspberry Pi (or any Linux)
+# Usage: git clone ... && cd Bambu-Run && bash setup.sh
+set -euo pipefail
+
+REPO_DIR="$(cd "$(dirname "$0")" && pwd)"
+VENV_DIR="$REPO_DIR/.venv"
+ENV_FILE="$REPO_DIR/.env"
+MANAGE="$VENV_DIR/bin/python $REPO_DIR/standalone/manage.py"
+SERVICE_DIR="$HOME/.config/systemd/user"
+
+green()  { printf '\033[1;32m%s\033[0m\n' "$*"; }
+yellow() { printf '\033[1;33m%s\033[0m\n' "$*"; }
+red()    { printf '\033[1;31m%s\033[0m\n' "$*"; }
+
+# ── 1. Pre-flight checks ─────────────────────────────────────────────────────
+
+green "=== Bambu-Run Native Setup ==="
+echo
+
+# Acquire sudo upfront and keep it alive for the duration of the script
+echo "This script needs sudo for iptables (port redirect) and apt (dependencies)."
+sudo -v
+while true; do sudo -n true; sleep 50; kill -0 "$$" || exit; done 2>/dev/null &
+SUDO_KEEPALIVE_PID=$!
+trap 'kill "$SUDO_KEEPALIVE_PID" 2>/dev/null' EXIT
+echo
+
+# Python >= 3.10
+PYTHON=""
+for cmd in python3.12 python3.11 python3.10 python3; do
+    if command -v "$cmd" &>/dev/null; then
+        ver=$("$cmd" -c 'import sys; print(f"{sys.version_info.major}.{sys.version_info.minor}")')
+        major=${ver%%.*}
+        minor=${ver##*.}
+        if [ "$major" -ge 3 ] && [ "$minor" -ge 10 ]; then
+            PYTHON="$cmd"
+            break
+        fi
+    fi
+done
+
+if [ -z "$PYTHON" ]; then
+    red "Error: Python >= 3.10 is required."
+    echo "Install it with: sudo apt install python3"
+    exit 1
+fi
+green "Found $PYTHON ($ver)"
+
+# Ensure python3-venv is available
+if ! "$PYTHON" -m venv --help &>/dev/null; then
+    yellow "Installing python3-venv..."
+    sudo apt-get update -qq && sudo apt-get install -y -qq python3-venv
+fi
+
+# Detect RAM for gunicorn worker count
+TOTAL_RAM_KB=$(grep MemTotal /proc/meminfo 2>/dev/null | awk '{print $2}' || echo 0)
+if [ "$TOTAL_RAM_KB" -lt 1048576 ]; then
+    WORKERS=1
+else
+    WORKERS=2
+fi
+
+# Prompt for access port
+while true; do
+    read -rp "Choose Bambu-Run Dashboard access port (Default: 80): " ACCESS_PORT
+    ACCESS_PORT="${ACCESS_PORT:-80}"
+    if [[ "$ACCESS_PORT" =~ ^[0-9]+$ ]] && [ "$ACCESS_PORT" -ge 1 ] && [ "$ACCESS_PORT" -le 65535 ]; then
+        break
+    else
+        red "Invalid port '$ACCESS_PORT'. Please enter a number between 1 and 65535."
+    fi
+done
+green "Dashboard will be accessible on port $ACCESS_PORT."
+
+# ── 2. Venv + install ────────────────────────────────────────────────────────
+
+if [ ! -d "$VENV_DIR" ]; then
+    green "Creating virtual environment..."
+    "$PYTHON" -m venv "$VENV_DIR"
+else
+    yellow "Virtual environment already exists, reusing."
+fi
+
+green "Installing dependencies..."
+
+# Stub opencv-python (same trick as Dockerfile — avoids hour-long ARM build)
+"$VENV_DIR/bin/python" -c "
+import site, pathlib
+d = pathlib.Path(site.getsitepackages()[0]) / 'opencv_python-4.99.0.dist-info'
+if not d.exists():
+    d.mkdir()
+    (d / 'METADATA').write_text('Metadata-Version: 2.1\nName: opencv-python\nVersion: 4.99.0\n')
+    (d / 'INSTALLER').write_text('pip\n')
+    (d / 'RECORD').write_text('')
+    print('  opencv stub created')
+else:
+    print('  opencv stub already exists')
+"
+
+"$VENV_DIR/bin/pip" install --quiet --upgrade pip
+"$VENV_DIR/bin/pip" install --quiet ".[standalone]"
+
+# ── 3. Interactive .env ───────────────────────────────────────────────────────
+
+if [ ! -f "$ENV_FILE" ]; then
+    green "Setting up .env configuration..."
+    echo
+
+    read -rp "Bambu Lab email: " BAMBU_USERNAME
+    read -rsp "Bambu Lab password: " BAMBU_PASSWORD
+    echo
+    while true; do
+        read -rp "Timezone [UTC] (e.g. America/Sydney): " TIMEZONE
+        TIMEZONE="${TIMEZONE:-UTC}"
+        if "$VENV_DIR/bin/python" -c "import zoneinfo; zoneinfo.ZoneInfo('$TIMEZONE')" 2>/dev/null; then
+            break
+        else
+            red "Unknown timezone '$TIMEZONE'. Find yours at: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones"
+        fi
+    done
+
+    # Generate a random Django secret key
+    DJANGO_SECRET_KEY=$("$VENV_DIR/bin/python" -c "import secrets; print(secrets.token_urlsafe(50))")
+
+    cat > "$ENV_FILE" <<EOF
+BAMBU_USERNAME=$BAMBU_USERNAME
+BAMBU_PASSWORD=$BAMBU_PASSWORD
+TIMEZONE=$TIMEZONE
+DJANGO_SECRET_KEY=$DJANGO_SECRET_KEY
+DEBUG=False
+EOF
+    green ".env created."
+else
+    yellow ".env already exists, skipping."
+fi
+
+# ── 4. Migrate ────────────────────────────────────────────────────────────────
+
+green "Running database migrations..."
+$MANAGE migrate --noinput
+
+# ── 5. Bambu authentication ──────────────────────────────────────────────────
+
+if ! grep -q '^BAMBU_TOKEN=' "$ENV_FILE" 2>/dev/null; then
+    green "Authenticating with Bambu Lab (email verification required)..."
+    echo "A verification code will be sent to your email."
+    echo
+
+    # Run collector in --once mode for interactive auth
+    $MANAGE bambu_collector --once || true
+
+    echo
+    read -rp "Paste your BAMBU_TOKEN from above (or press Enter to skip): " TOKEN
+    if [ -n "$TOKEN" ]; then
+        echo "BAMBU_TOKEN=$TOKEN" >> "$ENV_FILE"
+        green "Token saved to .env."
+    else
+        yellow "Skipped — you can add BAMBU_TOKEN to .env later."
+    fi
+else
+    yellow "BAMBU_TOKEN already in .env, skipping auth."
+fi
+
+# ── 6. Superuser ─────────────────────────────────────────────────────────────
+
+echo
+if $MANAGE shell -c "from django.contrib.auth import get_user_model; exit(0 if get_user_model().objects.filter(is_superuser=True).exists() else 1)" 2>/dev/null; then
+    yellow "Superuser already exists, skipping. (To add another, run: python standalone/manage.py createsuperuser)"
+else
+    green "Create your dashboard login (Django superuser):"
+    $MANAGE createsuperuser || yellow "Superuser creation skipped."
+fi
+
+# ── 7. Collect static files ──────────────────────────────────────────────────
+
+green "Collecting static files..."
+$MANAGE collectstatic --noinput --clear 2>/dev/null
+
+# ── 8. Seed filament colors ──────────────────────────────────────────────────
+
+echo
+read -rp "Import Bambu Lab filament color catalog? [Y/n] " SEED_COLORS
+SEED_COLORS="${SEED_COLORS:-Y}"
+if [[ "$SEED_COLORS" =~ ^[Yy] ]]; then
+    $MANAGE bambu_import_colors "$REPO_DIR/docs/Bambu_Color_Catalog/"
+fi
+
+# ── 9. Install systemd services ──────────────────────────────────────────────
+
+green "Installing systemd user services..."
+mkdir -p "$SERVICE_DIR"
+
+# Generate unit files with actual paths substituted
+sed "s|{{REPO_DIR}}|$REPO_DIR|g; s|{{VENV_DIR}}|$VENV_DIR|g; s|{{WORKERS}}|$WORKERS|g" \
+    "$REPO_DIR/native/bambu-run-web.service" > "$SERVICE_DIR/bambu-run-web.service"
+
+sed "s|{{REPO_DIR}}|$REPO_DIR|g; s|{{VENV_DIR}}|$VENV_DIR|g" \
+    "$REPO_DIR/native/bambu-run-collector.service" > "$SERVICE_DIR/bambu-run-collector.service"
+
+systemctl --user daemon-reload
+systemctl --user enable bambu-run-web.service bambu-run-collector.service
+
+# Enable linger so services survive SSH logout
+loginctl enable-linger "$USER" 2>/dev/null || \
+    sudo loginctl enable-linger "$USER" 2>/dev/null || \
+    yellow "Warning: Could not enable linger. Services may stop when you disconnect SSH."
+
+systemctl --user start bambu-run-web.service bambu-run-collector.service
+
+# ── 10. Port redirect (ACCESS_PORT → 8000 via iptables if needed) ────────────
+
+PORT_OK=false
+if [ "$ACCESS_PORT" -eq 8000 ]; then
+    # Gunicorn already on 8000 — no redirect needed
+    green "Using port 8000 directly (no redirect needed)."
+    PORT_OK=true
+else
+    if sudo iptables -t nat -C PREROUTING -p tcp --dport "$ACCESS_PORT" -j REDIRECT --to-port 8000 2>/dev/null; then
+        yellow "Port $ACCESS_PORT → 8000 redirect already set."
+        PORT_OK=true
+    else
+        # Ensure iptables is available
+        if ! command -v iptables &>/dev/null; then
+            yellow "Installing iptables..."
+            DEBIAN_FRONTEND=noninteractive sudo apt-get install -y -qq iptables
+        fi
+        if sudo iptables -t nat -A PREROUTING -p tcp --dport "$ACCESS_PORT" -j REDIRECT --to-port 8000 && \
+           sudo iptables -t nat -A OUTPUT -o lo -p tcp --dport "$ACCESS_PORT" -j REDIRECT --to-port 8000; then
+            green "Port $ACCESS_PORT → 8000 redirect configured."
+            PORT_OK=true
+            # Persist so it survives reboot
+            if ! command -v netfilter-persistent &>/dev/null; then
+                yellow "Installing iptables-persistent to survive reboots..."
+                DEBIAN_FRONTEND=noninteractive sudo apt-get install -y -qq iptables-persistent
+            fi
+            sudo netfilter-persistent save 2>/dev/null || sudo sh -c 'iptables-save > /etc/iptables/rules.v4'
+        else
+            yellow "Warning: Could not set port $ACCESS_PORT redirect (sudo required). Access via http://<ip>:8000"
+        fi
+    fi
+fi
+
+# ── 11. Summary ───────────────────────────────────────────────────────────────
+
+PI_IP=$(hostname -I 2>/dev/null | awk '{print $1}')
+if [ "$PORT_OK" = true ] && [ "$ACCESS_PORT" -ne 8000 ]; then
+    DASHBOARD_URL="http://${PI_IP:-localhost}$([ "$ACCESS_PORT" -eq 80 ] && echo '' || echo ":$ACCESS_PORT")"
+else
+    DASHBOARD_URL="http://${PI_IP:-localhost}:8000"
+fi
+echo
+green "============================================"
+green "  Bambu-Run is running!"
+green "============================================"
+echo
+echo "  Dashboard:  $DASHBOARD_URL"
+echo "  Status:     systemctl --user status bambu-run-web bambu-run-collector"
+echo "  Logs:       journalctl --user -u bambu-run-web -u bambu-run-collector -f"
+echo "  Helper:     ./native/bambu-run.sh {start|stop|restart|status|logs|update}"
+echo
+echo "  Services auto-start on boot. Safe to close SSH."
+echo

standalone/manage.py

@@ -5,7 +5,15 @@ import sys
 
 # Ensure the project root (/app) is on sys.path so that both 'standalone'
 # and 'bambu_run' are importable regardless of where this script is invoked from.
-sys.path.insert(0, os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
+PROJECT_ROOT = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
+sys.path.insert(0, PROJECT_ROOT)
+
+# Load .env so manage.py commands pick up env vars outside of systemd/Docker
+try:
+    from dotenv import load_dotenv
+    load_dotenv(os.path.join(PROJECT_ROOT, ".env"))
+except ImportError:
+    pass
 
 
 def main():